Hi,
In a property that is being renovated there is a Potterton Profile 100e boiler controlled by a Potterton EP2002 Controller wired to an ancient Satchwell room Thermostat.
Is it possible to replace this controller / room stat combination with a modern RF room thermostat linked to an RF...
I know that a fused spur can have addition sockets, but the garage is currently ( and would appear to have been like this since it was built in '85) fed from a socket in the utility room; spurred off the socket for the washing machine. The detached garage has a DB with a 15A and 6A fuse and I...
Hi guys,
Is it mandatory to have extraction in the kitchen and utility on a new extension? I need a quick answer, otherwise I`d look it up in Part F.
Cheers
Hi,
I have one socket in my utility room, this socket is part of the down stairs ring main. I have taken a fused spur from this socket and ran two sockets of it, room is smaller than 12m squared, so 3 sockets is recommended for this size room, is that correct? I have used 2.5mm cable to run the...
Never really thought about it before, but today the contractor replaced a CFL lamp in my office that had been flickering for a couple of days. I just happened to pick-up the lamps box and reading the usual fluff the manufacturers print on these boxes read this statement. ....Not suitable for...
Hi everyone
Called to a heating system not working correctly, boiler fine, mid-position valve in place. Boiler not firing up all the time, initially thought it could be a faulty mid-position valve. However there seems to be a problem with the receiver! When turning room stat up some times I...
Hi all
Just after some info regarding a room stat I've installed.
I don't do heating controls at all really so you might have to bare with me.
Customer has a Worcester Greenstar 24I Junior Combi boiler and asked me to install a stat.
I purchased a Drayton RTS8 room stat which says...
Builder is converting cloakroom to wet room with the addition of pumped shower. In considering the zones is it the distance from the shower rail or the water outlet? Have selected appropriate LED lights which are zone 1 compliant. Circuits protected by 30ma RCD but just don't like the idea of...
Hello,
Can anyone tell me if there is such a device where you can power off the sockets in a room when you leave the house in one go.
For example I have an AV setup with lots of sockets hidden behind a low rise cabinet.
I just wanted an easy way to power off the room at night or when I go out...
Morning. I'm currently working a challenging large, oak framed building and i have no choice but to install 2 socket outlets on different phases within the same. i know there are old rules of thumb e.g. 2 metres, but wanted to know if someone could quote a regulation? my forum searches havent...
I want to add a remote room thermostat to my present central heating system.
At present I have a Draytek non-remote room thermostat which is located in the bedroom and I want to leave that one there. It has been wired/setup so that, when the heating is switched on, when the temperature drops...
Following my previous post in this forum regarding installing an additional forum, I would like to follow a suggestion made that I should install a remote room thermostat.
My current room thermostat, located in a bedroom, when it calls for heat it is wired to simply switch on the central...
I have a simple central heating system with a traditional Baxi Solo 2 60RS boiler supplying heat to radiators around the house.
The room thermostat is located in the main bedroom and so calls for heat
only when the temperature in that room requires. When heat is required this
thermostat is...
hi grateful for a bit of help
my daughter in law has recently had a new combi boiler fitted when she showed me the installation i was surprised to see that the original anaogue sunvic thermostat remained in place. we decided to replace it with a danfoss tp5000 digital thermostat. very helpfully...
Evening all!
Replaced existing thermostat today for one of those Eco stat which I have attached a spec:
It is a combi gas heating system (Worscher Bosh) and before I connected new eco thermostat the temperature on combi was working fine at a steady 24C. After replacing old for new the...
Hi all, job visited they are extending downstairs wc and fitting a shower(quadrant)the meters gas, elec and old wilex rewireable cu. they want a new cu fitting, shower feed, lights etc. I have told them the cu will have to be moved out of room but meters can remain boxed in! (In cupboard with...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc