Hi everyone
There is a switch board which is single phase, but when you look at the back you will see 2, 16mm cable go to the fuse(red and white). What is that for ? I haven't seen before.
And the black and blue cable goes to the service neutral link !!!
In Australia 3 phase color is Red White...
Got called to "a flat in Manchester has no hot water" at 16:30 today and to be frank I was a little miffed to have to attend.
So arrives at site, spends 20mins finding parking, 30 mins finding the site contact, getting keys and then being informed that it was not one flat but eleven.
Have no...
Hi I’m upgrading the fog lamps on a 2013 Range Rover sport to combined FOG and DRL got the fogs working but have a single wire to be connected to an ignition live, where will the closest ignition live wire be
Hi, I have been asked to fit a 32a isolator ready for an air con unit and picked one up from screwfix. Unfortunately the one I have is a 4 pole, can this still be used with 6mm t&e or do I need to replace it with a 2 pole. If it can be used do I just use terminals L1 & T2
Thanks
Got an emergency call out from a very worried old lady the other night - the power at her apartment had gone off and the kitchen light was smouldering badly. She'd been on the phone to the DNO (Northern Powergrid), they were telling her to turn the main switch off but she couldn't understand and...
This should be simple...
Master bedroom has a single pole switch leading to a new and perfectly working fixture. I'm trying to install a Feit smart wi-fi dimmer for it. The switch box contains a top cable with a black, white, red & ground wire and a bottom cable with a black and white cable. The...
Hi All,
I currently have two 490w JA Solar panels fixed mounted to my external garage roof, I want to try and add a single axis mount somehow, without a pole, so I can use a sun tracker to tilt the panels throughout the day, anybody done, tried, have any ideas of how this can be done.
Cheers
Gaz
This coffee machine is three phase model number sm 105e
It’s three phase with 3 brown cables one neutral and earth
What is the cheapest way to wire it in?
thanks
I have a workshop in a remote location which I rent out. The incoming supply is 3 x 16A three phase on 180m of 16mm SWA.
An upcoming customer has a machine which needs a 32A single phase supply. (Actual load about 25A.)
The energy is there, but it's split across the three phases. Is there some...
Situation.
Domestic TNS
Main consumer unit fed direct to incoming.
it has an upfront single pole RCD works fine. No main switch. No double pole isolation available.
Is this a potentially dangerous situation due to single pole Isolation?
I feel I can’t bring myself to give a C2 on an EICR...
Im a DIY novice. I have changed central AC thermostat, light fixtures, switches etc. This has me stumped.
I have a 240v single pole baseboard heater with an old mercury thermostat. I would like to replace that thermostat with a Honeywell TL8130A.
Question 1 - Can someone explain the wiring to...
I am looking for a single gang outlet + dimmer switch combination.
Does such an item exist?
It's for a kitchen backsplash the outlet would be unswitched and the dimmer/switch would control a light over the sink.
The whole backsplash is on a GFI so I don't need a GFI in this device.
-Kevin
I have two outdoor sockets(in poor condition) wired to two ground bedded armoured cables.The sockets are linked to one another via three wires(coloured live,neutral and earth).The sockets therefore have two wires in each terminal.I want to replace with double rcd socket.Can I join the bedded...
Had a weird one tonight, with a new tenant who had a higher than expected first monthly bill.
Studio flat with one storage heater and off peak immersion, standard white Economy 7 meter with teleswitch.
Bulb had set the tenant up on their single rate tariff and happily accepted the two readings...
All, I'm a bit stumped trying to convert a three way traditional switch over to the Smart Caseta Single Pole On/Off switch. There are two switches today for a light, the plan is to convert one switch to the Smart switch, then add a secondary remote to the alternate switch location - essentially...
Hi all,
As per the subject, I am looking to change an existing single switch for a bathroom to a double switch to control an additional light in the bathroom. I have looked at the wiring and there seems to be:
1. one feed (T&E) to the switch (i.e. no return for the loop so I imagine there is a...
Hello all,
I have an odd problem here and I am at a loss.
I'm replacing a light fixture and dimmer switch on our dining room circuit. The problem I'm having is that both boxes only have one cable in them. (one black, white and ground).
When I turn the breaker back on and use my tester...
Hi,
We are considering installing two 45A shower in a single property (multible showers). I believe the incoming service fuse is 100A.
The problem is, if both showers plus other devices are used it could exceed the 100A max.
Would it not matter as it's unlikely both showers used at the same...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc