2391 question multiple choice IR help to break down

[sid521]

During the construction of an installation, insulation resistance tests have been carried out between live conductors and earth on the individual circuits and the L to E results are shown below. What is the expected value of insulation resistance L to E when the whole installation is tested?




can someone explain how to break down this question?

thanks

 

[westward10]

What are the four multiple choice answers?

 

[sid521]

didnt show answer

 

[sid521]

there is another with the answer

The insulation resistance of two circuits is of 40MΩ an 36MΩ respectively. When tested together what is the total insulation resistance:?

answer is 22mohms

 

[sid521]

What are the four multiple choice answers?

33.6mohms is correct answer

 

[DPG]

Bear in mind that when all the circuits are connected to the consumer unit, they are effectively in parallel. This should give you a clue as to how to answer the question.

Even without a calculator, there is one value that it will certainly be less than.

 

[westward10]

didnt show answer

For multiple choice there should be four answers. As above, with the answers you will require no calculation although it can be done by calculation.

 

[westward10]

https://www.electronics-tutorials.ws/resistor/res_4.html

 

[sid521]

ah yes is it the median 130 value divided by the number of circuits 4 so 130 divided by 4 equals 32.5 (correct on multiple choice) thanks

 

[Risteard]

During the construction of an installation, insulation resistance tests have been carried out between live conductors and earth on the individual circuits and the L to E results are shown below. What is the expected value of insulation resistance L to E when the whole installation is tested?

View attachment 119857


can someone explain how to break down this question?

thanks

1/Rt = 1/R1 + 1/R2 + 1/R3 + 1/R4...

 

[Risteard]

33.6mohms is correct answer

32.23 Megohms unless I punched something in incorrectly. Probably just a rounding error actually. (Maybe they were only going to 2 decimal places or something at each step.)