3.6kw oven on a 13amp plug top.

[markthespark]

Hello i have been asked to install an oven that is 3.6kw, i am wondering whether this would be fine plugged into a socket behind the existing oven taking into account diversity.

or whether i need to put it on its own radial supply.

Is there anyway of fusing a ring main down to 16amps?

Thanks.

 

[Prat P]

Only if the connections are loose or the plug is a poor fit in the socket. Daz

which will probably occur in time..hence the wild suggestion that an alternative means of connection be considered.

 

[DPG]

which will probably occur in time..hence the wild suggestion that an alternative means of connection be considered.

You are still confused. I am talking about the fact that you stated a 2KW appliance would somehow damage a 13A plug-top. I am NOT talking about the original 3.6KW question. Daz

 

[Prat P]

You are still confused. I am talking about the fact that you stated a 2KW appliance would somehow damage a 13A plug-top. I am NOT talking about the original 3.6KW question. Daz

I have answered that question already,read the entire thread and not just 1 comment and then you will be aware of the context in which said comments were made. . Dpg

 

[ImpededLoop]

Ok. Just to help DPG and me out here, what exactly happens when you connect a 2kW heater using a plug top?

I appreciate that you may have already answered before, but it seems that I (and maybe DPG) can't pick out the answer despite having re-read the thread.

 

[DPG]

Right, why does a good quality 13A plug melt when used with a standard 13A socket and a 2KW load then? Daz

 

[DPG]

Apologies impeeded - I posted at the same time I think

 

[DPG]

I guess we aren't going to find out what the issue is then. Daz

 

[Pete999]

Yes come clean mate what happens when to a plug top when you plug it into a 13a socket with a 2KW load? I'm dying to find out

 

[7029 dave]

Good quality plug top= no problem.

 

[7029 dave]

I have my IH, on mk plug top for back up just in case CH packs up, no problem.

 

[HappyHippyDad]

I'd quite like to know what happens to a 13a Socket on a 2kW load as well?

We're queuing up for this answer :smile5:

 

[Guest77]

Apparently, an 8 amp load on a double socket isn't good news chuckle, and it can melt a plug top long term

 

[trev]

Good grief it's obvious, if you put a 2k appliance on a plug top then your daughter will become a heroin fuelled prostitute and your son will become a rent boy because their home will have vapourised because of your negligence.

 

[Guest77]

They melt them eventually

Do they? where did you hear that? the barbers shop in the high street.

 

[Engineer54]

You're all talking about plug top fuses being sized to the appliance, when in fact they are to be sized to the cord connected to the appliance as that's what they are intended to protect, NOT the appliance!!