3 phase domestic job | Page 3 | on ElectriciansForums

Discuss 3 phase domestic job in the Domestic Electrician Forum area at ElectriciansForums.net

Joined
Mar 30, 2018
Messages
17
Reaction score
3
Location
Bristol
I fully accept that having swapped trades half way through my life I don't have the years of experience that many of you guys have and maybe I should have put my time in as an apprentice, but that isn't how it all turned out for me!

I am a qualified electrician with Stroma, but find their technical support patronising and unhelpful to say the least.

I do a lot of standard domestic work but I haven't done a lot of 3 phase. I have a friend who has a domestic 3phase installation which needs re-designing as they are upgrading their old night storage as well as getting new immersion heaters and aga etc. An extension is pending too!

I really want to help them out with project as this as the work lies awkwardly between your average domestic and commercial and they can't find anyone who can deal with it. It would be interesting and push my knowledge but it wouldn't be something I would be prepared to take on without having someone more experienced check my plans.

It would be quite a mission to put it all in a post so I was hoping maybe someone experienced would be willing to chat on the phone or meet up for an hour to talk it through. Happy to pay for the time.
 
This could be a good opportunity to simplify everything and tidy it up a bit - unless there's a good reason for them I'd put everything from those 3x single phase consumer units together in one 3 phase board on RCBOs.

Depending on the layout it may be worth taking sub mains to different parts of the house, but just because they don't currently own any 3 phase equipment doesn't mean they're not going to suddenly decide to make the most of their 3 phase supply, go out and buy a 3 phase pizza oven or welding set, you know, because they can.
 

Depending on the layout it may be worth taking sub mains to different parts of the house, but just because they don't currently own any 3 phase equipment doesn't mean they're not going to suddenly decide to make the most of their 3 phase supply, go out and buy a 3 phase pizza oven or welding set, you know, because they can.

They may even decide to have a stage the garden and host a mini festival!
 

Reply to 3 phase domestic job in the Domestic Electrician Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
706
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
3K

Similar threads

Think all has been covered already, but echo-ing the above if I was getting my DB swapped and had a 3 phase head, I would put a little TPN board...
Replies
5
Views
450
  • Solved
An NVQ is a vocational qualification and is based upon your work experience and what you put into your portfolio for your assessor to judge you...
Replies
4
Views
997

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top