Been told my install is dangerous! Is it? (with pic) | Page 2 | on ElectriciansForums

Discuss Been told my install is dangerous! Is it? (with pic) in the Australia area at ElectriciansForums.net

cable_guy

-
DIY
Joined
Aug 2, 2010
Messages
59
Reaction score
0
Hi all,

I'm new here, so hi!

I know nothing about electrics, but am thinking of selling my house and I'm hoping someone can help me please.

A couple of years ago I had my electric shower fixed, and in doing so the electrician saw my main install and said that he shouldn't really touch it as it's too old. Don't think he was trying to con me as the electric shower was an insurance job so he knew he wasn't going to get any money out of me etc......

[ElectriciansForums.net] Been told my install is dangerous!   Is it? (with pic)


Does this look like I should get it upgraded please?

If so, any idea how much it'd cost me to do?

Many thanks in advance.
 
Possible nick but i would suggest if you look realy hard i think that its a twin and you can just see it pass the top corner of the cut out fixing board and continue down the celing.

But hey im sure it wouldnt be the fist time either us have traced a cable wron.

Jim

is this picture any better? sorry about the shoddy pic its quite hard to take photos in there!

[ElectriciansForums.net] Been told my install is dangerous!   Is it? (with pic)


eskimo39 - There aren't any green or yellow cables I can see, and I live in the middle of a city. ÂŁ400-600 best case :eek: bang goes my recessed spot lights I think then!!!
 
Well there is one thing i will say ,call your electrical supplier and get them to check see if the earth has been installed its labled as a PME (TNCS) so it should be ,there is no visable earth comming from the cutout , but seeing the closer picture and with the old obsolete RCD im now sure its a TT system ,having said that the main cable looks like its relativly new ,concientric type
 
Last edited by a moderator:
Black rubber if your house has it ,unfortunatly it will need a rewire , black rubber disintegrates rapidy , it tends to get brittle and basically crumbles away , may be perfectly alright , but in the many cases ive seen it may not
 
Its good luck with that photo
The pme earth is available,which is a very good start

4.5 and 6 hundred for a consumer unit change :eek:

I am shocked as well.you wouldn't get those sort of prices in my 3rd world area
250 maximum,city slicker cprices "say another ton"

My I sometimes wish I lived in a city :)
In answer to the cable type

They are now trying to frighten your bank manager :)

If it is Vir,then the installation will become an expensive pain
I suspect the shower spark would have told you if that were the case
An onsite assessment by a local spark may be your best way forward

I dont go much for your method of looking for a spark
Perhaps go on the competent person website and search for an electrician who is registered for Periodic inspection by the schemes
 
Im affraid the electric board are no better than the rest of us if they fitted it on a friday and its all they had in the van it is more than possible you have a TT and a TNCS cut out.

Your visible cables look painted at top of CCU (fuse box) so you may not be able to see them.

Im affraid they are all right though you need a sparks to have a look at it try and find one recommended by a friend.

Good luck

Jim
 
I dont go much for your method of looking for a spark
Perhaps go on the competent person website and search for an electrician who is registered for Periodic inspection by the schemes

Hi Des, thanks for the advice. I'm not sure what you mean, is there some sort of registered professional electrician website I've not seen?

I have submitted my tender to ratedpeople.com to get sparkies out to have a closer look at it to see what they will charge, do you think thats a good idea?
 
Hi cable guy if you go on the elecsa nic napit websites you can search for a regestered spark have alook may be helpful

cheers, a lad from a firm in crewe has got back in touch with me already about coming to have a look on Wednesday, but searching for his company's name on NICEIC doesn't say that he's on there!! Should I ask to see any of his papers etc if I want him to do the work?
 
cheers, a lad from a firm in crewe has got back in touch with me already about coming to have a look on Wednesday, but searching for his company's name on NICEIC doesn't say that he's on there!! Should I ask to see any of his papers etc if I want him to do the work?

He may be registered with another body i.e. Elecsa or Napit these are similar to NICEIC only the NICEIC are more known however as long as he is registered for one of these schemes for any work carried out if you agree for him to put right anything that needs doing otherwise you will have to pay for Local Authority Building Control to check the work complies with Part P regulations.

Check out my website for more info on Part P or visit Welcome to ELECSA or Part P | Electricians | Building Regulations - NAPIT UK
 
cheers, a lad from a firm in crewe has got back in touch with me already about coming to have a look on Wednesday, but searching for his company's name on NICEIC doesn't say that he's on there!! Should I ask to see any of his papers etc if I want him to do the work?

The niceic is just one of the schemes
Look at the communities and local government website for competent persons
State where you live and a list of people from the 3 main schemes will be available
Click on the individuals name and check thier scope with the scheme providor as to whether they are covered for test and inspection(pir)

There are various levels of competence
Full scope(they can install and self certify all domestic installations
Full scope with Pir approval (they can do a pir under the banner of the scheme)
Defined scope These are other trades who can do work associated with their tade example Plummers kitchen fitters etc
The defined scope members are prone to taking on work they are not permitted because "they have their part p" or some other useless jargon that theys spout

The main schemes are niceic,napit,elecsa(eca)

If you employ someone who is not registered then by law you have to inform bulding control and follow their procedure as regards notifiable work under part p of the building regs and pay a large fee
If they are not listed, then they are not registered,so chose carefully
 
Hi all,

I'm new here, so hi!

I know nothing about electrics, but am thinking of selling my house and I'm hoping someone can help me please.

A couple of years ago I had my electric shower fixed, and in doing so the electrician saw my main install and said that he shouldn't really touch it as it's too old. Don't think he was trying to con me as the electric shower was an insurance job so he knew he wasn't going to get any money out of me etc......

Does this look like I should get it upgraded please?

If so, any idea how much it'd cost me to do?

Many thanks in advance.

No idea, I have the exact same electrical layout in my garage though
 
cheers, a lad from a firm in crewe has got back in touch with me already about coming to have a look on Wednesday, but searching for his company's name on NICEIC doesn't say that he's on there!! Should I ask to see any of his papers etc if I want him to do the work?

Try searching on HERE.

This covers all the schemes
 

Reply to Been told my install is dangerous! Is it? (with pic) in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
316
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
841
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
964

Similar threads

I opened up the CU again and the round junction box above and what I found was the blue and brown wires coming in from the wall just above the 15a...
2 3
Replies
33
Views
2K
N
  • Question
He hasn't provided any certificates, including previous work. He sends invoices when he needs paying.but no vat registration number etc on...
  • Nessab16
  • Ireland
  • 8
  • 552
Replies
8
Views
552
Nessab16
N

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top