bonding to water pipe. | Page 3 | on ElectriciansForums

Discuss bonding to water pipe. in the UK Electrical Forum area at ElectriciansForums.net

Joined
May 1, 2012
Messages
32
Reaction score
5
I have recently done an EICR test on a flat. The only issue being that the water pipe is not bonded at the stop cock. The stop cock itself is located just outside the flat front door in a service cupboard - the trouble is the pipes are all plastic in the service cupboard and under the floor into the flat.
It seems to be that all pipe on show is plastic, the only copper pipe I have found is in the water tank cupboard which is nowhere near the point of entry or the stop cock and is permanently screwed shut.

My question is where should I bond it?
 
You'd think it's a job for people to keep visiting this forum, then give cynical remarks for them and their chums to snigger at.
Talking about driving the under experienced under ground; I now reply via private messaging to those who obviously need direction.
 
You'd think it's a job for people to keep visiting this forum, then give cynical remarks for them and their chums to snigger at.
Talking about driving the under experienced under ground; I now reply via private messaging to those who obviously need direction.

On some occasions you have a point.
But on this one we have an EICR being carried out by someone who has to ask where the water should be bonded. A first requirement of EICR's is competance and experience.Everbody who carries out EICR's will sometimes come up against something they are unsure of,but those properly qualified to carry them out will refer to the BGB/onsite guide etc for guidance. If someone has to ask something as basic as where to bond the water quite frankly their report isn't going to be worth the paper it is written on.
All of which furthers the impression a lot of people have,namely that EICR's are going the same way as PAT testing....Easy money.
 
I actually agree 'wire puller' so I suppose disagreement settled.
My gripe is at those one line statements that produce nothing productive.
I view the forum, I see naive, and head down hopes of learning meet with a pack of hyenas.
If it's the same shi^ different day, then do the majority a favour and fuc^ off and respond with useful posts in which you want to partake in.
I only ever seem to public post now when I'm at logger heads with somebody. Not a great rapport.
 
I actually agree 'wire puller' so I suppose disagreement settled.
My gripe is at those one line statements that produce nothing productive.
I view the forum, I see naive, and head down hopes of learning meet with a pack of hyenas.
If it's the same shi^ different day, then do the majority a favour and fuc^ off and respond with useful posts in which you want to partake in.
I only ever seem to public post now when I'm at logger heads with somebody. Not a great rapport.

I suppose it depends on the mood some of us old hands are in....sometimes I come over all helpful,and sometimes it's hard not to give pelters to another ,'RCD trips after CU change but all tests are fine and it's definately all connected properly' threads. Some of the posters ask for it TBH,but equally some dont deserve it.
I think if a poster is completely honest about their experience, qualifications and ability it would help a lot. It can be hard not to bite when they big themself up and then ask a really basic question.
 
You'd think it's a job for people to keep visiting this forum, then give cynical remarks for them and their chums to snigger at.
Talking about driving the under experienced under ground; I now reply via private messaging to those who obviously need direction.


I know there was talk some time ago regarding the legal implications of advice given in the diy section and I wonder if there is a problem here also with "private tutoring "?


Boydy
 
Any advice/information is freely accessible on the internet. You just have to Google stuff and there is normally several answers. I agree with you that some information in the wrong hands is dangerous to say the least but if the info is correct, then its up to the person reading and interpreting it to take responsibility. But there are some bad questions on here and I just choose to ignore them. You can lead a horse to water....but if it takes a ---- or a ---- instead of drinking......what can you do????lol

Jay
 
Again 'wire puller ' another valid point. I agree to the utmost.
Boydy, I think you missed the point a little. Jay sparks, I think sums it up with a great statement. The sentence was to emphasise how through such behaviour can heighten those risks of inexperienced teaching the inexperienced.
 
Full of the useful comments aren't you MDJ
Yup, I am trying to overtake Biff as the forum Troll, however he is 20 leagues above me and I am struggling to make an impact in that particular area :smilielol5:regarding your OP, come on your winding us up surely?????? some of the top Professional electricians on this site haven't seen this thread yet, I hope for your sake they don't, if I annoy you wait until you get slaughtered by them lol
 
so...to the OP:

do you consider yourself competant to carry out ECRs...or in other words cast judgement on works your being employed to inspect?

caus if you dont know if bonding is required...or not...and where to bond then its shameful that you think you can take cash for this..

its incompetancy...simple as that.

there:....2 in as many days.
 

Reply to bonding to water pipe. in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
300
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
812
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
865

Similar threads

I understand your question and it can be a can of worms, on the one hand as mentioned in your previous reply is it a extraneous conductive part...
Replies
2
Views
691
K
  • Article
Seeping pipe connection to Loft Cold water Had a problem with hammering noise coming from pipes (triggered by hot water, though it could be eased...
Replies
0
Views
166
KennyA
K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top