Cannot get RCD test to work? | Page 11 | on ElectriciansForums

Discuss Cannot get RCD test to work? in the UK Electrical Forum area at ElectriciansForums.net

HappyHippyDad

-
Esteemed
Arms
Supporter
Joined
Dec 18, 2011
Messages
5,277
Reaction score
5,772
Location
Gloucestershire
Evening chaps..

I have just fitted some downlights in a bathroom and needed to give them RCD protection as there was none. I fitted the following:

[ElectriciansForums.net] Cannot get RCD test to work?

The test button works fine and the unit trips when a fault occurs (touching neutral to earth) but I cannot get the MFT to test it for trip times which I need for the MWC. Its a fairy decent MFT and I've never had any trouble with it testing RCD's before but I have never tested this sort of RCD before, it has always been in the CU. I make contact with the live/neutral/earth of something which the RCD is feeding, I get the little 'tick' on the MFT and then it just wont test.

Am I missing something simple here? Is this unit tested in the same way as you would an RCD in a CU?
 
Onions it isnt as easy as that is it yessterday there was quite clearly baiting going off in my opinion.
This is how i see it iamelectric and meggerman seem to have a problem with Glenn and Mike who are both friends of mine as they are with lots of members in here. And i cant find anything insulting that was apparently said by MDJ towards the op mIke is a well respected member here and all i can say Meggerman is, your comments to him yesterday were out of order as he had done nothing wrong, if you have got a problem with either glenn or mike then be a man about it and sort it out with them this is not a bloody playground itis a forum for professionals so get a grip.
Thats my opinion like it or lump it to everyone
 
Onions it isnt as easy as that is it yessterday there was quite clearly baiting going off in my opinion.
This is how i see it iamelectric and meggerman seem to have a problem with Glenn and Mike who are both friends of mine as they are with lots of members in here. And i cant find anything insulting that was apparently said by MDJ towards the op mIke is a well respected member here and all i can say Meggerman is, your comments to him yesterday were out of order as he had done nothing wrong, if you have got a problem with either glenn or mike then be a man about it and sort it out with them this is not a bloody playground itis a forum for proffesionals soget a grip.
Thats my opinion like it or lump it to everyone
Cheers I have had 2 versions of what was said yesterday and am in no doubt Meggar man was trying to provoke an argument, well he got one, and I was not to blame, anyhow as I mentioned a few posts back, all over, bored and time to move on
 
Fair play Mike, and for the record i dont have a problem with meggerman i dont even know the guy but i dont want to see the forum end up like a playground or trolling ground
 
Cheers I have had 2 versions of what was said yesterday and am in no doubt Meggar man was trying to provoke an argument, well he got one, and I was not to blame, anyhow as I mentioned a few posts back, all over, bored and time to move on

More nonsense. Your comments are unfounded and you act like a school yard bully when caught out. I'll leave it now as am getting bored too. I don't forget either.
 
Fair play Mike, and for the record i dont have a problem with meggerman i dont even know the guy but i dont want to see the forum end up like a playground or trolling ground
I never had a problem with him either until the unprovoked attack on me for absolutely no reason, I have no problem with Iam actually either, I thought Iam was a good fella, wtf is happening here jeez.
 
More nonsense. Your comments are unfounded and you act like a school yard bully when caught out. I'll leave it now as am getting bored too. I don't forget either.
are you on drugs? you, not me started this whole thing off, how can I be a bully when my only participation in this thread was positive to steve (hippy the op), seriously you have issues, your about as normal as a one legged man tight walking with a chair tied to his chest hair whilst blindfolded.
 

Reply to Cannot get RCD test to work? in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

Ok I’ll try this when I’m down
Replies
4
Views
354
L
  • Question
My Understanding is the 6 Months interval is IET Guidance and this wording is incorporated onto the label which is a requirement in 514.12.2 where...
Replies
9
Views
568

Recommended Sponsor News

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top