Electricity DNO Supply installation outdated and UNSAFE?

[Gutsy-Fungus]

Hi folks,

Moving into my new property in a couple of weeks to find a concerning electrical installation in the cubby hole underneath ther stairs. I have attached a couple of pictures of the installation.

1. Does this main feed from the DNO (#3) look safe (left hand picture)? It is corroded and appears unsafe. What to do?
2. I am a bit confused with all the bits labelled up with numbers. Can anyone in the know comment?

The house was built over 100 years ago and any steer on what to do would be appreciated. The electrical supply components are in the living area (okay under the stairs and in a cubby hole) and appear as if they need relocating to the outside.

Many thanks!

D

 

[James]

A lot to unpack here.
first the items numbered are as follows

1 main cut-out fuse
2 spare unused cut-out fuse
3 service head
4 spare unused cut-out fuse
5 a damaged cable joint (often called a henly block)
6 & 7 henly blocks

If it were my house, I would call the DNO and tell them that a connection on one of the cables between the service head and the meter is damaged and you can access the screws.
ask them to come and make it safe. (item 5)

then when the engineer comes to do the replacement of the damaged block, you can ask them there opinion on the service head itself.