Garage Receptacle Height? | on ElectriciansForums

Discuss Garage Receptacle Height? in the UK Electrical Forum area at ElectriciansForums.net

dmbarney

DIY
Joined
Dec 17, 2023
Messages
2
Reaction score
0
Location
Ohio
DIYer here. Can somebody tell me what the required height is for receptacles in a garage due to possible flammable vapors? Thanks
 
In the U.K. we don’t generally allow sockets (recepticals) where there are explosive gasses.
 
DIYer here. Can somebody tell me what the required height is for receptacles in a garage due to possible flammable vapors? Thanks
I need more information because it sounds like you have a class 1 division 1 environment especially if flammable vapors are present. You need to install them 18 inches to the bottom of the receptacle.
 
I need more information because it sounds like you have a class 1 division 1 environment especially if flammable vapors are present. You need to install them 18 inches to the bottom of the receptacle.
Actually its going to be a detached wood shop 40'x50', but I will be parking 2 vehicles on the other side of the shop. A friend mentioned since you are parking vehicles there is a potential risk of gasoline vapors say something leaked. So he said put them up high. I was just wondering how high do I have to put them in this case. The ones in my attached garage are at 28" from the bottom of the boxes. Thanks
 
Actually its going to be a detached wood shop 40'x50', but I will be parking 2 vehicles on the other side of the shop. A friend mentioned since you are parking vehicles there is a potential risk of gasoline vapors say something leaked. So he said put them up high. I was just wondering how high do I have to put them in this case. The ones in my attached garage are at 28" from the bottom of the boxes. Thanks
28 inches should be fine. Good luck
 

Reply to Garage Receptacle Height? in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
356
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
909
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

J
  • Article
Tiling over screed/plywood floor with height differences. Hi guys. Im a carpenter who has tiled a fair few floors over the years as i fit a lot...
Replies
0
Views
145
Johnny
J
  • Question
So this was resolved. I used a line tester to see if I had power across the breaker on the main box in the house. Breaker tested fine. Then I...
Replies
3
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top