Garage wiring unsafe and not earthed | on ElectriciansForums

Discuss Garage wiring unsafe and not earthed in the DIY Electrical Advice area at ElectriciansForums.net

Joined
Jan 8, 2018
Messages
4
Reaction score
0
Location
caerohilly
I have a two storey garage with supply from house. On closer inspection I saw that the main supply in was not earthed at the junction box and neither was the light switch(feeding three lights), there is also a double socket in the garage not earthed either. I have ripped out all the wiring and junction box and light switch and double socket. I was hoping to rewire it myself, I know how to wire it all up but would like some advice on junction boxes and want to run a fridge and tumble dryer off double socket too. any advice will be welcome, if Im not confident enough I will obviously get a professional in.
 
As murdoch said, if the house in Tncs, they could have TT'd the Garage, you might have just ripped everything out for nothing.
 
the main supply in was connected to the junction box by live and neutral, the earth wire in the triple core wasn't connected to anything.
What type of cable is feeding the garage?
 
Hi mate. Are you saying there were no earth wires to any of the sockets or light fittings in the garage?
 
As murdoch said, if the house in Tncs, they could have TT'd the Garage, you might have just ripped everything out for nothing.

Could that be dangerous as the local earth could be at a different potential to N? Or does it depend on the installation being check for that after install?
 
Were the lights and sockets run in metal conduit?
 
Hi mate.
Why did you rip out all the fixing, if just the wiring was faulty?
As @Pete999 asked, what type of cable is feeding the garage. Is it twin & earth?
Where does this cable wire to? Your CU?
How does this cable get from its source to the garage?
Does your CU have an RCD?
 

Reply to Garage wiring unsafe and not earthed in the DIY Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
391
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
975
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

The 3A fuse is there to protect the current lighting. For additional power you connect from the non protected 3A fuse side.
Replies
1
Views
560
Why go to the trouble of adding another cable, which I assume would follow the same route as the other ?. Why not upgrade it. It was to try to...
    • Like
Replies
1
Views
190

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top