Greatest Electrical Game Changers | Page 2 | on ElectriciansForums

Discuss Greatest Electrical Game Changers in the UK Electrical Forum area at ElectriciansForums.net

We also mustn’t forget that bastion of electrical safety and quality control, the NICEIC. I’m sure UNG will whole heartedly argued on that one. ?
Nothing wrong with it AT ALL..........until the millennium, Part Peee and quick courses, and charity eyes filling with spiralling money signs as a result.
 
4 good things:
  • PVC instead of VIR
  • MCB instead of rewirable fuse
  • RCD for all domestic sockets
  • LED lighting
4 bad things
  • Throw-away LED lights
  • Smart meters being anything but smart
  • TN-C-S without a requirement for local earth rods
  • General deskilling of industry (not just parks)

Good call on the mcb ,rcd and pvc

I would have the RCD and the voltstick/single point contact testers at the top of the list
 
Proper Apprentice, does that ring a bell as opposed to a boil in the bag sparky tin hat on.

Perhaps the industry could do more bit to assist with that.

I've finally managed to find a local college that 'might' provide me with an adult apprenticeship, but so far haven't managed to find anyone willing to take me on as an adult apprentice. The same college has a huge number of applications from school leavers, most of whom will miss out due to being unable to find placements, so this isn't an issue of age. It's all well and good advocating for proper training, but it's a two way street. Over the last few years I've come to understand that people might undertake short courses out of desperation, rather than a desire to find an easy route.

As it's a Sunday afternoon there's not much I can do to further my future employment prospects, but I can enjoy reading about changes that made a significant difference to the industry.
 
OP - Great new idea for a post.

MFTs - Relatively inexpensive considering their safety of use, sophistication, reliability, ease of use, robustness, accuracy, resolution and precision - and for work done usefulness to quality assurance.

'It ain't working and safe until it has been properly tested.......'
 
Last edited:
Many of the important foundations for the 20th century electrical industry were laid during the 19th century so let's look a bit further back beyond RCDs and Voltsticks. As with many key inventions, progress was often made in parallel by more than one person or team, so credit for some of these milestones is due also to others too numerous to include:

Arc lamp - Humphry Davy - c.1805
Transformer (principle) - Michael Faraday - 1831
Generator (principle) - Hippolyte Pixii - 1832
Practical generator - ZĂ©nobe Gramme - 1871
Filament lamp - Joseph Swan - 1879
Distribution at fixed voltage using transformers - Zipernowsky, Bláthy & Déri - 1884
Practical 3-phase machines - Mikhail Dolivo-Dobrowolsky - 1889
Commercial HV power transmission - Sebastian de Ferranti - 1891
Steam-driven turbo-alternator - Charles Parsons - 1901
Tungsten lamp - Sándor Just & Franjo Hanaman - 1904

Once we get into the 20th century it gets a bit busy - there are literally hundreds of critical developments without which we would not be where we are today.
 

Reply to Greatest Electrical Game Changers in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
319
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
844
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
967

Similar threads

In my opinion replacing the consumer unit and waiting to see which RCBO trips is not a good fault finding technique. If the lighting circuit...
Replies
8
Views
687
davesparks
D
  • Question
Or just save all the agro and get a proper sparks round for 45 minutes to test the supply cable and re-fit the socket 'properly'
2
Replies
19
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top