Kitchen Appliance circuit

[Snapester]

Designing a kitchen appliance circuit, i plan to feed a bank of grid switches with a 6mm T&E fed via a 32A MCB, then each switch will have a 2.5mm cable to a fcu supplying an under counter appliance.
My main question is, is it ok to change down to 2.5mm and then feeding the FCU? As the cable cannot be overloaded as the main load is connected to the FCU at position?

Regards

 

[Engineer54]

There you go, ...your learning!!!

 

[telectrix]

get a few beers down, then a staggered circuit of the pub. sorted