Makita 18v brushless SDS drill

[Leesparkykent]

Just purchased one tonight. Any one have one? Also was wondering if any one has tried replica batteries or are they not worth getting? Makita DHR242Z 18V SDS Plus Brushless Rotary Hammer Drill Bare Unit

 

[Leesparkykent]

Makita 18V 4.0Ah Li-Ion REPLACE Battery BL1840 1830 4000AH TOP sell A+ | eBay

Like this one.

 

[Sparkie30]

I have a replica one, over 2 years old and still going.

 

[Leesparkykent]

I have a replica one, over 2 years old and still going.

Is it on par with the real McCoy?

 

[newtothis]

That's a very good price - have been using one for a couple of days, it seems to do whatever you want for 20mins on a full 3ah.

 

[Leesparkykent]

That's a very good price - have been using one for a couple of days, it seems to do whatever you want for 20mins on a full 3ah.

I find FFX one of the cheapest around

 

[Aindowsimon]

I've bought the exact drill also today !

 

[Leesparkykent]

I've bought the exact drill also today !

Similar price?

 

[Aindowsimon]

No you saved £2.41 on me ! I bit the bullet earlier, have been upgrading slowly

 

[Leesparkykent]

I'm also going to purchase a replica battery to see if it's any good. I watched this review earlier.

https://m.youtube.com/watch?v=45X5QNCpxF0

 

[sam400]

I tried a replica battery from amazon but it didn't even last a year, only use genuine ones now - you can get a 3ah for less than £60. Nice drill by the way!

 

[bmines67]

I started off my makita li-ion kit about 4 years ago with an sds drill, combi drill, torch and 2 batteries. Both genuine batteries (3.0Ah) went faulty within a year. They just stopped charging, every time i put them in the charger they would flash green to red indicating a faulty battery. Since then i bought 2 replica 4.5Ah batteries off ebay for around £35 each. I've had mine for 3 years now with no problems, other than i dropped one 4 meters from a ladder and cracked the casing but nothing some black insulating tape didn't fix. No problems recommending replicas

 

[BreakingBad]

Has anybody tried returning the genuine faulty Makita batteries to the manufacturer, I think you may be surprised with the outcome.

 

[Sparkie30]

Is it on par with the real McCoy?

to be honest I can't tell the difference. One thing I know the do not like cold replica and original. They won't charge. What I do if it's flat put it on top of a heater for 20-30 mins and all good.


good luck hope you like it.

 

[HappyHippyDad]

I've used the brushless makita SDS for around 2 years now Lee. I have to admit when I first used it I didn't like it as I didn't feel it had as much initial control as my previous one (Hitachi). However, that was just me getting used to it and I like it now, it seems more powerful than the Hitachi.

I can't help you with the replica batteries though. I feel if I am going to spend the money on such a good quality drill then I may as well put the right batteries in it! :smile5: