Mira Shower

[Jamesa2487]

Hi

I have a Mira Digital shower which has been fine.

On Friday night I had to cut the electrics to the whole house and since I put them back on the digital controller has been showing out range.

The Mira "box" is in the attic and have a 3amp fused spur which connects to it. The fuse in that is fine there is also a fuse on the main board that says shower which doesn't trip at all.

I have attached a picture of the board in the Mira box and don't know how I would go about testing.

The odd thing is that even with the fused spur of the board still lights up my electrical pen.

I have changed the batteries in the digital controller but still just get out of range

Board part number 1796.137

Thanks

 

[PADGET5783]

Hi all, have the same issue as above.
Have had a plumber out that has advised the glass fuse in the mixer unit keeps blowing, but could not advise what the cause might be. Any ideas?