Mira Sport 9.8kw Shower Problem

[AJ284]

Hi guys I'm new here.
As in the title, been having an issue with my shower. The LED on the pull chord goes off when I turn the shower on. Lights on the shower do not come on either and no water comes out.
So far, I have changed the latching switch and the solenoid coil but no luck.

Any ideas?

 

[Octopus]

I suspect Mira's minimum charge would be far higher than a local spark?

 

[buzzlightyear]

I suspect Mira's minimum charge would be far higher than a local spark?

cost for one them £159.00 labour parts included .

 

[Dave-geo]

99% it will be the pull cord, probably overheated on the neutral side.
Fit new pull cord making sure the terminals are tight and in future pull cord on, shower on, shower off, pull cord off.

 

[123]

I did have a similar fault a couple of years ago, it turned out to be a faulty Proteus RCD

 

[Pete999]

I did have a similar fault a couple of years ago, it turned out to be a faulty Proteus RCD

Nothing new there then

 

[PEG]

I suppose the moral here,is a proper testing method,would determine exactly what is the fault is,instead of gueoping.

(that's yllis,for guessing and hoping)

 

[AJ284]

I replaced the pull chord switch and it sorted the issue (ages ago, forgot to reply). Have done this once before already but the problem was slightly different as the light on the switch didn't come on at all.

Thanks for the help folks.