NEW circuits into non amm3 DB. ????? | Page 4 | on ElectriciansForums

Discuss NEW circuits into non amm3 DB. ????? in the UK Electrical Forum area at ElectriciansForums.net

Joined
Mar 28, 2016
Messages
217
Reaction score
92
Location
saddleworth
If I was to wire an extension on a house , and the DB does not meet amendment 3 , where do I stand adding new circuits into this DB , is it ok or should it be changed to Amm 3 DB
Know I should know the answer to this but hey ho were not all perfect
 
In addition, people should stop worrying about how the CU looks, stop cable tying conductors, and pay more attention to making a safe CU install, by all means make it a tidy install, stop making how nice it looks the be all, remember you put a cover on after you have connected it up, so all the poncing about with bending conductors is hidden, make it safe, tidy and secure we would be far better off.[/QUOTE
How many terminals have you checked over the years have needed a good old tweak with a screwdriver , know I have tweaked a lot over the years , sure some of these so called sparks use one driver for all connections
 
In addition, people should stop worrying about how the CU looks, stop cable tying conductors, and pay more attention to making a safe CU install, by all means make it a tidy install, stop making how nice it looks the be all, remember you put a cover on after you have connected it up, so all the poncing about with bending conductors is hidden, make it safe, tidy and secure we would be far better off.[/QUOTE
How many terminals have you checked over the years have needed a good old tweak with a screwdriver , know I have tweaked a lot over the years , sure some of these so called sparks use one driver for all connections
 

Reply to NEW circuits into non amm3 DB. ????? in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
381
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
961
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

And fully tested it with an MFT obviously
Replies
9
Views
339

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top