NEW circuits into non amm3 DB. ?????

[Dozer 73]

If I was to wire an extension on a house , and the DB does not meet amendment 3 , where do I stand adding new circuits into this DB , is it ok or should it be changed to Amm 3 DB
Know I should know the answer to this but hey ho were not all perfect

 

[Dozer 73]

In addition, people should stop worrying about how the CU looks, stop cable tying conductors, and pay more attention to making a safe CU install, by all means make it a tidy install, stop making how nice it looks the be all, remember you put a cover on after you have connected it up, so all the poncing about with bending conductors is hidden, make it safe, tidy and secure we would be far better off.[/QUOTE
How many terminals have you checked over the years have needed a good old tweak with a screwdriver , know I have tweaked a lot over the years , sure some of these so called sparks use one driver for all connections

 

[Dozer 73]

In addition, people should stop worrying about how the CU looks, stop cable tying conductors, and pay more attention to making a safe CU install, by all means make it a tidy install, stop making how nice it looks the be all, remember you put a cover on after you have connected it up, so all the poncing about with bending conductors is hidden, make it safe, tidy and secure we would be far better off.[/QUOTE
How many terminals have you checked over the years have needed a good old tweak with a screwdriver , know I have tweaked a lot over the years , sure some of these so called sparks use one driver for all connections