Pylon advice please - wooden pylon voltage advice | Page 3 | on ElectriciansForums
Guest viewing is limited

Discuss Pylon advice please - wooden pylon voltage advice in the Talk Electrician area at ElectriciansForums.net

I worked in very close proximity to mobile phone antennas on a regular basis and receive training in EMF and non-ionising radiation and its effects.

A lot of the information on the web is made out of historic scepticism and lack of knowledge on the effects to the human body.

A recent study carried out by an independent research agency in Europe has shown there are no long term effects from EMF and non-ionising radiation.

You may get immediate effects such as heating of the skin and flu like symptoms but you would have to be very close to the source, so close the electricity would have cooked you anyway.

We use radiation monitors that barely flicker when passed in front of high power microwave links yet and old vacuum cleaner makes the thing go mental.

You are actually at greater risk from your microwave oven and Wifi router.

I appreciate you want to give your kids the best start in life, as we all do, but don't let paranoia rule over you.
 
I worked in very close proximity to mobile phone antennas on a regular basis and receive training in EMF and non-ionising radiation and its effects.

A lot of the information on the web is made out of historic scepticism and lack of knowledge on the effects to the human body.

A recent study carried out by an independent research agency in Europe has shown there are no long term effects from EMF and non-ionising radiation.

You may get immediate effects such as heating of the skin and flu like symptoms but you would have to be very close to the source, so close the electricity would have cooked you anyway.

We use radiation monitors that barely flicker when passed in front of high power microwave links yet and old vacuum cleaner makes the thing go mental.

You are actually at greater risk from your microwave oven and Wifi router.

I appreciate you want to give your kids the best start in life, as we all do, but don't let paranoia rule over you.
Thank you
 
Thank you for everyone's responses. We had some tests done which was all done free of charge through the national grid and the readings are fine. For anyone that's interested the line is 33kv not 11 as I previously thought. The readings are as low as 0.01 micro teslas at the end of the drive and they say as low as 0 closer whicy I find difficult to understand as I thought that there was always a baseline level over zero anywhere. I'm satisfied with this however and we are continuing with the purchase and putting the issue to bed. From what I've read we are exposed to higher levels watching tv or standing near the fridge
 
If you Google the Bridgwater map find Parkway and go to street view you will find a road with a wide verge between houses and a transmission line right down through the middle. The one you have is 33Kv but this one is many times higher, however for years there have been reports of residents at certain points along there feeling unwell and other things. It is possible to hold a fluorescent tube under such a line and for it to glow from the radiated emf in certain atmospheric conditions. Yes the official view is it is safe. However, think of an MRI scan, this machine creates a magnetic field to cause your cell structure to aline in a certain way so that an image can be taken. There is a huge magnetic field around HV distribution and logically it must somehow affect the bodies cells. The question not answered anywhere is whether this is serious or of no passing consequence. For that reason I would not buy a house near them. I apologise if that seems too negative.
 
If you Google the Bridgwater map find Parkway and go to street view you will find a road with a wide verge between houses and a transmission line right down through the middle. The one you have is 33Kv but this one is many times higher, however for years there have been reports of residents at certain points along there feeling unwell and other things. It is possible to hold a fluorescent tube under such a line and for it to glow from the radiated emf in certain atmospheric conditions. Yes the official view is it is safe. However, think of an MRI scan, this machine creates a magnetic field to cause your cell structure to aline in a certain way so that an image can be taken. There is a huge magnetic field around HV distribution and logically it must somehow affect the bodies cells. The question not answered anywhere is whether this is serious or of no passing consequence. For that reason I would not buy a house near them. I apologise if that seems too negative.
Thanks for your comment however we have had the EMF readings carried out and at the edge of the drive they are 0-0.01 micro teslas so this is minute and less than you would expect in a house that was miles from any power lines. I appreciate that there are mixed opinions on this and research is ongoing however because we have had readings done we know the actual risk associated with how close the house is with this line which is basically none, or at least certainly no greater than if a line was no where near
 
I see where you're coming from and you could be right. Change of events as it transpired that an 11kv cable had been buried in the garden running the entire length of the house about 1 metre from the house. Scottish Power came and took readings in every room in th house and in the garden and to cut a long story short, they were pretty high. Well within government guidelines of course but we took the view that we aren't happy with the levels set as safe by the guidelines when looking at loads of peer reviewed studies and international standards so we have actually withdrawn from the sale. Disappointed but it would always have been at the back of my mind. There were certain areas of the garden I wouldn't have been happy with the kids playing in, even though I accept there are so many mixed findings on the subject. You're supposed to be able to relax in your own home and at the end of the day we decided we might not ever fully forget about this cable. Thanks again for all the input
 
If we could see magnetic fields we would probably stay of the internet ,for fear of our
laptops ,TV screens , power supplies.
Unlike Xrays , nothing bad has been found of MRI scans , though maybe not used on the young s much !
 
Thankyou for sharing your worries as a parent .
( Playing near power lines - not a good childhood skill )
It was the TV public announcements in the 70s that put the fear of the good Lord into us about not climbing the fence to get your frisby back - stange they don't have those adverts now even though I feel people are a little less intelligent and sometimes need reminding!
 
I've got an 11kV line at the bottom of my garden and a substation halfway down fed by underground cable. I sit listening to my ham radio and don't have any problems with interference from either but my smartphone causes a hell of a noise on it!
Had an event where we set up a Coleman Event Shelter under a 33kV pole route. Got a slight tingle from the induced emf in the tent poles!
 
I've got an 11kV line at the bottom of my garden and a substation halfway down fed by underground cable. I sit listening to my ham radio and don't have any problems with interference from either but my smartphone causes a hell of a noise on it!

Not to mention the problems PLT's cause, and those are the legal ones not to mention the "imported" high power ones!

Anyway... apologies and back to the original subject!! 73s
 

Reply to Pylon advice please - wooden pylon voltage advice in the Talk Electrician area at ElectriciansForums.net

Similar threads

D
  • Article
Type of washer Hi Team, I have a leaky radiator as it washer must of got damaged when it was fitted Anyone know what this washer is called? And...
Replies
0
Views
80
dwaindigital
D
R
  • Article
Can anyone help me identify these bathroom taps please? Hi Can anyone identify the make and model of these taps please? We have one dripping...
Replies
0
Views
234
Richt5a
R

Recommended Sponsor News

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Thread starter

Email
Joined
Time zone
Last seen

Thread Information

Title
Pylon advice please - wooden pylon voltage advice
Prefix
N/A
Forum
Talk Electrician
Start date
Last reply date
Replies
44
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top