RCD Earth Leakage

[garysparky1]

I Need a little help i recently fitted a new consumer unit for a mate. The house is empty and up for sale so i thought no problem as not in a hurry continuity was ok on all circuits IR ok ,Ze 0.09,PFC 2.95kA so i changed the board then powered up and the 80a 30Ma RCD tripped i disconnected each circuit and reset it tripped on each circuit. I've since gone back with a clamp meter and found 29-39Ma running through the bonding. I clamped ( on lowest setting)the neutral and line seperately on each circuit and got kitchen N-0.70 L-0.46Ma and downstairs lights N-0.47 L 0.10 surely these differences in reads are too high can anybody steer me in the right direction. :frown2:

 

[plugsandsparks]

Yep, what wirepuller says, used to put lighting, smoke, alarm on non rcd side and everything else on RCD. I just couldn't understand why he was fitting one (unless it had been lying around and was free), either way a few regs went by the wayside.

 

[Knobhead]

There was a N bar for the main switch side and one for the RCD side on a standard split load db...so it was still possible to cock up the neutrals back in the 16th days!

OK I'm going senile. View attachment 12098

 

[arturas]

And I thought , that you should IR test before energizing.

 

[telectrix]

i IR test myself each morning. i'm still not able to energise myself.

 

[arturas]

which part trips ? lol

 

[GLENNSPARK]

mmeeeeooooooooooooooowwwwwwwwwwwwwwww

is that what we call tweeking the cats tail?..lol...

 

[ezzzekiel]

You say it best, when you say nothing at all,
theres a song in there somewhere, and I'm keeping stum in future, silent like a ninja, freedom of speech is lost!

 

[GLENNSPARK]

i think the silent approach may work in future.....well for me anyway..lol....but this really is the type of thread that cant be taken seriously....for all the wrong reasons...lol....