Recommendations please - rechargeable work light | Page 3 | on ElectriciansForums

Discuss Recommendations please - rechargeable work light in the Electrical Tools and Products area at ElectriciansForums.net

This arrived today:

View attachment 41358

Obviously I'm using one of my batteries

Impressive amount of light ...............
i hate yellow. dewalt and fluke in equal amount. i had a hilmor conduit bender in yellow. soon got it resprayed in red/black. same with a stanley rolling toolbox. came in yellow. next day red/black.
 
What battery power tools do you use? Most should have very good 14/18v lights.

I have this LED light from Makita and it's first class.
There is a bigger brother to the stick lights from Makita, the DML805, takes the 18v batteries and also has an input for mains or 110v as well - have had the 110v /18v one for about a year and it is superb - more like a floodlight than torch!!
 
As an eBay Associate we earn from qualifying purchases.
Talking of lights, I see from my inbox today that TLC are promoting the Quinetic switches (I like them) and also show a remote fob due out in April, which will be fun and versatile...however, they also highlight the LED floodlight in various outputs starting from ÂŁ19.95, and that includes a wireless receiver already built in...yet the receiver itself is ÂŁ16.95, so that doesn't leave much over for the lamp itself...
however, at that price I'll probably buy one just for research.
 
Get an 18650 battery rechargeable headlamp off Ebay. Probably ÂŁ10 and ultra bright if you investigate and select carefully re the LED die they choose. Get one with two cells mounted at the back, and a strap over the top.
Dispose of any supplied 18650 batteries (supplied Ebay ones they will be poor quality and potentially incendiary). - Better to buy the bare torch without cells. Buy known fused-cell reliable 18650 cells. Also get a quality 18650 charger - not the one supplied.
Take care with "branded" knock-offs with lithium batteries, hence I always use Xtar factory shop (which you can google).
Lasts all day, often two days.
 
Get an 18650 battery rechargeable headlamp off Ebay. Probably ÂŁ10 and ultra bright if you investigate and select carefully re the LED die they choose. Get one with two cells mounted at the back, and a strap over the top.
Dispose of any supplied 18650 batteries (supplied Ebay ones they will be poor quality and potentially incendiary). - Better to buy the bare torch without cells. Buy known fused-cell reliable 18650 cells. Also get a quality 18650 charger - not the one supplied.
Take care with "branded" knock-offs with lithium batteries, hence I always use Xtar factory shop (which you can google).
Lasts all day, often two days.
mine was off ebay. i use the 18650s and charger that came with it. never a problem, except the charge time is several hours from flat. think it was about as tenner all in. can't see how they make'em for that. similar from screwfix is ÂŁ51.
 
mine was off ebay. i use the 18650s and charger that came with it. never a problem, except the charge time is several hours from flat. think it was about as tenner all in. can't see how they make'em for that. similar from screwfix is ÂŁ51.

With the cheaper Chinese ebay batteries, many are "recycled" from cells taken from old laptops and when they are re assembled, they do not contain any over charging protection.
Add to that the often crude chargers you get in these cheap deals, and there is a danger of the batteries igniting or even exploding due to over heating during charging.

A quick google search will find examples of it happening, but I don't know what the real risk is...

Personally, I would not leave such chargers/batteries charging unattended, especially if it is going to be for any extended time....
 
got similar.dual setttings. 10watt and 20 watt. forbigger ,longer jobs, this.
[ElectriciansForums.net] Recommendations please - rechargeable work light
gets a bit hot though.
I remember one of them, on site in a commercial kitchen. One idiot knocked it over and it was leaning against the white, pvc lined wall......found it about 2 hours later...all the wall was burnt and warped.
 
I remember them for a while as an apprentice, along with the festoon lighting, then the boss got a load of 2d tasklights some difference and they’d take a battering and still work, think that’s why he changed, cost him a fortune in lamps lol
 
Pity that the queen didn't know that.

Wikipedia ; Windsor Castle fire. During renovation work. Halogen light on tripod left unattended.

The fire began in the Queen's Private Chapel at 11:15 in the morning when a curtain was ignited by a spotlight pressed up against it.

Way back in the late 90's I saw the result of a contractor who was building a combination coldroom/freezer room and left a double halogen floodlight on a tripod inside it with the door closed overnight. He claimed someone plugged it in without him knowing. The coldroom was a write off, all the plastic parts inside like the drain trays and the fan plates melted into a puddle underneath their original location, all wiring and motors were trashed, the styrofoam insulation in the wall and ceiling panels also went molten and ran out in places. It was only chance that it didn't start a fire.
 
Only ever slightly off topic, but is there a LED replacement bulb for the old 500W Halogen R7s bulbs?

I can see a few which physically fit, but the light output is only equivalent to a 60W bulb where as I was looking for something giving a similar output to the original 500w bulb...
 
Ignore last post...Just sprung for the Faithfull Rechargeable mentioned earlier in the thread...Will take the fire hazard Halogen to the skip this weekend!
 

Reply to Recommendations please - rechargeable work light in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
279
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
776
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
789

Similar threads

  • Question
Thanks for your reply As feared. Fit anything LED, say a prayer and hope it last beyond 12 months lol! I might even look at battery and lamp...
Replies
2
Views
761
I have the Kewtech that I bought in an emergency when my trusty Fluke that lasted many years gave up. It works! It has single pole testing too btw...
Replies
3
Views
1K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top