Strange set up - damn 25 characters

[gazdkw82]

Took this picture earlier. Has someone bypassed the meter?

Those tails go up to another c/u

 

[KEV 1 N]

I would say so! That grey/red tail in top of cutout looks like it should go into that MK double connector block below....tut! Tut!

 

[gazdkw82]

Thought as much

It seems so easy to do. I’m surprised

 

[littlespark]

Is there a seal on the suppliers fuse there?
New-ish c.u., and a smart meter... so any tampering has been done fairly recently.

 

[KEV 1 N]

Is it commercial property? Commercial supplies had smart metres a while before domestic smart metres came in, the fact the other DB is going through the meter would mean some electricity is being consumed and wouldn't arouse suspicions with the supplier ......crafty!

 

[gazdkw82]

It’s a corner shop across from my house. The whole set up is a mess. Asked to replace 3 smashed socket outlets. One of them was. Ring with 3 spurs off the back! I soon took 2 away.

 

[FatAlan]

Now there’s a dilemma for you? Are the owners aware and/or how have they reacted to you pointing it out?

 

[gazdkw82]

IV Not said anything to them yet. I’m going back tonight to fill around the sockets so I’ll tell them.

Hopefully they were not aware and will do the right thing and get it rectified. They have only been in the shop 2 years so it was probably done before that

 

[FatAlan]

Like with the bypassed supplies on cannabis grows the supplier can quite easily extrapolate back the electricity usage to show the time the bypass started and likely revenue loss. Have your clients checked their loft?

 

[gazdkw82]

No but I'll recommend they do lol

 

[gazdkw82]

Spoke with him yesterday. He didn’t understand at first, once he did he was really worried and has asked if I can take it out.

The seal is still on the cutout fuse.

Iv pulled a few fuses before so that’s no problem but how would I then go about removing that tail from the cutout?

 

[kingeri]

I wouldn't. Let the DNO do it!

 

[gazdkw82]

I’ll f he did dno come they will back charge him won’t they?

 

[FatAlan]

Do they own the shop or is it leased? If leased I’d be having serious word with the landlord. Do you know what the bypassed CU is supplying to get a feel if it’s been taking a serious load over the two years.
If it was my shop I’d get the DNO in to confirm the situation and then unleash hell on the landlord if rented.

 

[littlespark]

The seal is still on the cutout fuse.

Really?? The DNO left it like that, or the CU on the picture was fitted on a live cable?

Don't cut the seal. The DNO don't like that.... (yeh, we've all done it)
The customer should contact the DNO himself, explain it was like that when he moved in. Is there any stickers to say when the meter was changed? Or a dated sticker on the c.u to say when next test due?