Threadless Conduit Couplers

[malcolmsanford]

^^^^^^^^ is that the same as the running nipple Tony

 

[mark-iow]

Sorry i give up as i said before 29 years in this game a 5 year apprenticeship and still willing to learn. IM GOT SELLING THIS COUPLER im only asking if anyone has used them and the ones that have, have answered my question and for my conduit installation skills i believe i can do ok.

 

[Knobhead]

^^^^^^^^ is that the same as the running nipple Tony

I suppose it depends on where you were trained. To me a running nipple sound like a female complaint :yesnod:

 

[malcolmsanford]

I suppose it depends on where you were trained. To me a running nipple sound like a female complaint :yesnod:

If it's a piece of conduit threaded it's entire length for about 1.5 inches then cut off and screwed into a BESA box which leaves about 3/4 inch proud, and you run on a coupling backed by a locknut then we called them "running Nipples"

I remember you also called conduit blacked-Japaned and we always called in black-enamel strange how the trade in different areas call different things.

 

[Des 56]

I am sort of in the middle on this

Blackened japan ?

Isn't that a screw. Black japan screw with slotted head for pyro runs
Black enamel is conduit

Running coupler, thats definetly in my vocabulary

Running nipple

,definetly feminine fluid problems

 

[malcolmsanford]

I am sort of in the middle on this

Blackened japan ?

Isn't that a screw. Black japan screw with slotted head for pyro runs
Black enamel is conduit

Running coupler, thats definetly in my vocabulary

Running nipple

,definetly feminine fluid problems

Des black Japan for Pyro ...............brass round heads every time

 

[contract harry]

Looks like I got to this party a bit late.................

Soooo.... this is quite a bodacious claim that you can rattle up metal conduit as quick as the PVC stuff. (Probably quicker as you won't be gluing joints). My company gets through about 20KM's of steel pipe a year and I am blessed to have IMHO some of the best conduit engineers available working for me. HOWEVER, having just completed a job where, had we been able to simply cut into existing conduit in situ and make off with a push fit would have saved probably 40% of the total labour time. Regarding some of the narrow-minded posts I've seen here.........I too made my first "running coupler" over 30 years ago but don't feel the need to be pompus and dismissive.

Mr IOW, can you please PM me and give me the details of where to get these couplers. I will throw a few at the lads and see what they think. I might even try a continuity test (if I can remember how). Maybe I'll come back and share my findings.

 

[mark-iow]

Hi Harry sent link hope you got it and thanks mate.

 

[malcolmsanford]

Looks like I got to this party a bit late.................

Soooo.... this is quite a bodacious claim that you can rattle up metal conduit as quick as the PVC stuff. (Probably quicker as you won't be gluing joints). My company gets through about 20KM's of steel pipe a year and I am blessed to have IMHO some of the best conduit engineers available working for me. HOWEVER, having just completed a job where, had we been able to simply cut into existing conduit in situ and make off with a push fit would have saved probably 40% of the total labour time. Regarding some of the narrow-minded posts I've seen here.........I too made my first "running coupler" over 30 years ago but don't feel the need to be pompus and dismissive.

Mr IOW, can you please PM me and give me the details of where to get these couplers. I will throw a few at the lads and see what they think. I might even try a continuity test (if I can remember how). Maybe I'll come back and share my findings.

That seems to be rather un-impressive quote as I don't think anyone claimed that on the thread.

 

[Engineer54]

Looks like I got to this party a bit late.................

Soooo.... this is quite a bodacious claim that you can rattle up metal conduit as quick as the PVC stuff. (Probably quicker as you won't be gluing joints). My company gets through about 20KM's of steel pipe a year and I am blessed to have IMHO some of the best conduit engineers available working for me. HOWEVER, having just completed a job where, had we been able to simply cut into existing conduit in situ and make off with a push fit would have saved probably 40% of the total labour time. Regarding some of the narrow-minded posts I've seen here.........I too made my first "running coupler" over 30 years ago but don't feel the need to be pompus and dismissive.

Mr IOW, can you please PM me and give me the details of where to get these couplers. I will throw a few at the lads and see what they think. I might even try a continuity test (if I can remember how). Maybe I'll come back and share my findings.

So what narrow minded posts are you referring too?? Have you read this thread through even?? I ask because no-one has mentioned the claim your putting forward here!!!

That must have been a small conduit job, if you would have saved 40% in total labour time using these push-fit couplers. So your company gets through 20 km of conduit a year, that's far more than the average smaller sized company or the many one man bands that are around. But in the bigger scheme of things that's not a large quantity to get through in the course of a year for any decent sized company. The project i'm working on now the main electrical contractor will no doubt be ordering the 3 smaller sized conduits in 1000's of metres at a time...

One more thing, although i probably have far more respect for conduit installers than most here, they are not by any stretch of the imagination ''engineers''!!! They can however be worth there weight in gold on the right project, and can command pay rates reflecting that worth...

 

[rmc86uk]

They are a load of rubbish and its been brought up on the forum before. I was on a hospital job and the electrical company were to use them for existing conduits in walls but we were having to hide the little screw so the main contractor wouldn't see them. Agree with previous posts about them not being rigid! Some plumbing is push fit do we really need this in our trade? I'd like to think not!

Sent from my HTC Desire using Tapatalk

 

[Engineer54]

They are a load of rubbish and its been brought up on the forum before. I was on a hospital job and the electrical company were to use them for existing conduits in walls but we were having to hide the little screw so the main contractor wouldn't see them. Agree with previous posts about them not being rigid! Some plumbing is push fit do we really need this in our trade? I'd like to think not

To be fair, the link that Lenny posted , is for Push-Fit couplers with no set screws involved.
But still can't see how push-fit metal to metal can achieve an IP 67 rating... Still waiting for Mark, or anyone else, to post a link to the manufacturers website...

Not sure if these are the same couplings that the O/P was referring too in that post?? ....


Quick Connect Conduit Coupler - 20mm Push-fit - QVS Electrical Supplies | Electrical Wholesaler

 

[Engineer54]

Des black Japan for Pyro ...............brass round heads every time

As far as i can remember, it was usually black Jap round head screws, on PVC covered MICC with PVC coated clips. On bare MICC and uncoated clips, brass round heads.....

Nothing wrong in using the brass round head screws every time mind. ...Some were a bit on the weak side, and heads sheared off at the slightest over tightening... lol!!!

 

[contract harry]

Oh dear,

I received an "infraction" for my last post!
Okay, here is the polite version.

Thank you Mr IOW for bothering to share information. I feel that I have made a worth while discovery and this might in some way improve the way my company works.

Mr 57. I did not realise I have to qualify the extent and type of work my company performs to you. You seem to be making certain "assumptions" bassed on conjecture to somehow improve your credibility. I would be most interested to learn the motivation behind this?
I entered the figure for the amount of conduit my company used last year as a guide for anyone who was "genuinely" interested in this thread, as I believe it would be of more interest to larger contractors than smaller concerns. The narrow mindedness that I refer to is the users who have openly dismissed this product without trying it, and then using that foothold as an excuse to wallow in some supercilious nobility at being a quailfied electrician! If this product allows a 9 year old to make a running coupler in 20 seconds so be it. We are not dealing in witchcraft here!
As an electrician and director of a successful contracting business it is good to be open to innovation. From what I have witnessed here today I see that I have nothing in common with the majority of users and will probably not be contributing again. I fully intend to buy and "road test" this product so if anyone is interested in how it performs in the hands of "seasoned professionals you are welcome to PM me.

Harry out!