To crimp or not to crimp...... | Page 3 | on ElectriciansForums

Discuss To crimp or not to crimp...... in the UK Electrical Forum area at ElectriciansForums.net

Rob99

-
Joined
Mar 8, 2018
Messages
16
Reaction score
10
Location
Sussex
I'm going to be wiring up a smart home panel in a couple of weeks using mainly 0.5mm tri-rated cable and wondered what the view is on using crimped ferrules on the ends of the cables to fit into the screw terminals of the various components.
Seems like a good way to avoid poor connections with stranded cable and the neatness appeals to my OCD side!
Cheers
Rob
 
Indeed, cross purposes here. Soldered joints (other than dry joints!) are OK, although I do wish people would learn to make them properly, but tinned or solder-dipped ends of cables must not be put in screw terminals as mentioned above. I have seen this done so many times and they are invariably loose if not severed, or corroded from the flux. Only a few weeks ago I had to replace a 32A plug with a burned-out line terminal, where the ends had been tinned and all five cores were loose as anything due to cold flow.

OP- Bootlace!
 
I would just like to clarify that when i was using solder-dipped ends of cables they there for a 5 pin connector..10V :tearsofjoy:
 
I'm going to be wiring up a smart home panel in a couple of weeks using mainly 0.5mm tri-rated cable and wondered what the view is on using crimped ferrules on the ends of the cables to fit into the screw terminals of the various components.
Seems like a good way to avoid poor connections with stranded cable and the neatness appeals to my OCD side!
Cheers
Rob
I always use ferrules on flexible conductors, is the past I would solder the strands together to form one solid conductor.
 

Reply to To crimp or not to crimp...... in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
380
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
957
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Thanks all for your comments, advice and suggestions. The following is probably pretty boring for most, and is simply a summary of how the job...
Replies
8
Views
883

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top