OP
Deleted member 9648
If you think a screw is through the cable test between the cable ends and the screws...that would prove the screw had penetrated the cable before you start ripping it all up.
Discuss Underfloor Heating Drilled Through!?! in the Electric Underfloor Heating Wiring area at ElectriciansForums.net
Reply to Underfloor Heating Drilled Through!?! in the Electric Underfloor Heating Wiring area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 1K
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 3K
Similar threads
im just assuming that they are designed to be surrounded by material, and would heat to a certain amount, spreading the heat into the material...
- SSE
- UK Electrical Forum
- 4
- 306
- Question
It's the policy on this forum not to give step by step advice.
If you have an understanding of wiring requirements you will not have any...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Extending ring final - any potential gotchas?As above. Fitting additional sockets is preferable to hidden junction boxes, even if you never...
- Latest: brianmoooore
-
-
50% off tools inc makita till 3rd Jan 2025https://www.ebay.co.uk/e/_electronics/up-to-30-off-monitors?mkcid=1&mkrid=710-53481-19255-0&sitei...
- Latest: Dan
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.