What colour is this dimmer?

[peterhyper]

What colour is this dimmer please guys because I think I am going colour blind (if that's possible)?

 

[123]

Thanks for the replies all. I tried brushed chrome and it didn't mach and then I bought a BG iridium one and that didn't match either. I have now got to go back to the customers with hopefully the correct match (whatever that might be).

Better to turn the dimmer around and see what brand it is. Otherwise you will be forever guessing and getting it wrong. Most makes have the branding on the back of them.

 

[Toneyz]

At least if we see the back it will narrow it down to a brand we might be lucky and have a part No. on it.

 

[sponge23]

Looks like Varilight stuff.
https://www.tlc-direct.co.uk/Images/Products/size_3/VLHS3.JPG

 

[Electrical2go]

Have you had a look at the Click Deco Plus Stainless Steal?

 

[peterhyper]

Thanks again for the help all.

This is the back of it:

 

[peterhyper]

Oh dear, I thought it said Doyle and Pratt but its Doyle and tratt so it's a varilight (as I've just discovered). Perhaps Pratt is more appropriate for me

 

[elsparko]

Thanks for the replies all. I tried brushed chrome and it didn't mach and then I bought a BG iridium one and that didn't match either. I have now got to go back to the customers with hopefully the correct match (whatever that might be).

take the switch you need matched down to the wholesaler, pop a white one in its place till wholesaler runs about and finds what you need, its what they are there for

 

[telectrix]

why not buy any dimmer and swap the module into the existing faceplate?

 

[elsparko]

why not buy any dimmer and swap the module into the existing faceplate?

oooo smarty pants

 

[peterhyper]

why not buy any dimmer and swap the module into the existing faceplate?

It's not a replacemen, they want another one.

I should have really put a temporary switch in and taken their one to the suppliers.

I take the point that I should have asked the customer to source the dimmer.

 

[Taylortwocities]

Are there any identifying marks on the back side of the dimmer plate?