What Rates should I be getting as a subby | on ElectriciansForums

Discuss What Rates should I be getting as a subby in the UK Electrical Forum area at ElectriciansForums.net

J

John Matrix

Hello everyone I’ve recently become self Employed and it’s going ok. I’ve had a couple of weeks in a Job earning £21 an hour. I’m speaking to people on a regular basis and the question of what rate are you looking for always comes up. I’m just after some feedback on what rates to ask for. I have been getting £21 but I realise this is a top end rate in my area if the country. I don’t wana price my self out by asking for this much money all the time. So Is this too much? Is £21 about right? Or should I be asking for less to make sure I get the work.
Any feedback would be good. I obviously have a lot to learn.
 
Own tools, transport, insurance.
Assuming that you are doing this yourself, not just an extra pair of hands for someone.

I would not drop below ÂŁ25 per hour if I were you.
 
In my experience, If you a subby then you get what they are paying
It really depends on the company, area and hours your working
Some companies will negotiate depending on experience but generally they have a set hourly / day rate for subbies and do not ask the subby what he's asking for
 
You really have to test your market area
And see what price they will pay
You can always cut a special deal for truelly worthy customers,
But if you charge too little everyone will want the cheapest price
So don't charge too little, plenty of people will pay good money for good service
if you charge too little you make it hard for yourself and other sparkies
 
If you are happy with your rate and as you say it's top in your area, why are you asking us.
Because I’m struggling to get it. But now I’ve had it I don’t wana go lower
[automerge]1583658072[/automerge]
Good rate for subbing to companies, I only got ÂŁ15. Think if I continued I would of pushed for more. Have you registered, CIS payments etc?

When you move on to working for yourself & customers, you'll need to revisit.
Yes I’m registered CIS. I got £16 and a van on the books so obviously to make it worth it being a subby I wana be on quite a bit more.
 
I currently charge my colleague (we both have our own businesses) ÂŁ25.00/hour and I think that's more than reasonable. Take into account I supply a vehicle + fuel + maintenance costs, insurances, NICEIC cost's, test equipment (of a wide variety).
Imagine having to employ someone and supply all that plus holiday pay, pension etc etc etc.
 
Site rates vary in my area of Surrey , but you are typically looking at ÂŁ200 per day raising to ÂŁ250 per day the closer you edge towards London.
I know some guys getting ÂŁ300 a day in central London area.

If you are working directly for the customer that you can probably get away charging a bit more in my experience
 
Site rates vary in my area of Surrey , but you are typically looking at ÂŁ200 per day raising to ÂŁ250 per day the closer you edge towards London.
I know some guys getting ÂŁ300 a day in central London area.

If you are working directly for the customer that you can probably get away charging a bit more in my experience
This sounds about right. I was getting slightly more on the last job but I was on a good screw. Hopefully they have me back on the next job. They seemed more than happy with me. The next job is for 6 months.
 

Reply to What Rates should I be getting as a subby in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
437
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

A day for sure. I recently installed an Anderson with dedicated CU. The run was a fair bit worse as I had to drop a section of ceiling and chop...
Replies
13
Views
716
  • Question
After fitting out the first room of downlights.... i expect him to get a bit speedier at fitting them There is so many unknowns to price at this...
2
Replies
25
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top