What Was Your Last Tool And What Is Your Next?!?!

[telectrix]

Just ordered one of these to supplement my cordless kit

Milwaukee M18BMT-0 Multi Tools 18v BODY ONLY - https://www.powertoolsuk.co.uk/milwaukee-m18bmt-0-multi-tool-18v-body-only.html#product_tabs_specification_tabbed

you can now use the title of Total Tool Tart.

 

[Andy78]

you can now use the title of Total Tool Tart.

Ha maybe, I already have a corded one but there are many reasons I have convinced myself with that required me to buy this.
I reckon a total tool tart would say I should have bought a Fein.

 

[telectrix]

i've got a fein, but it's 110V. never runs flaT.

 

[sam400]

Those electricians pliers are worth there weight in gold one of my favorite tools!
I paid £43 for mine then proceeded to blow the end off within a couple of weeks was gutted!

 

[Specialist]

Those electricians pliers are worth there weight in gold one of my favorite tools!
I paid £43 for mine then proceeded to blow the end off within a couple of weeks was gutted!

Ouch, Been there done that. Not with Electricians pliers, but a brand new pair of cutters & I do mean that literally .

 

[HandySparks]

Just taken delivery of the new Makita 10.8V SDS.
Makita HR166DSMJ 10.8v 2 x 4.0Ah CXT Brushless Rotary Hammer Kit - https://www.ffx.co.uk/tools/product/Makita-Hr166Dsmj-0088381838412-10.8V-2-X-4.0Ah-Cxt-Brushless-Rotary-Hammer-Kit

Despite already having a choice of SDS drills, I decided that I needed a little one for fixing holes in hard brick and concrete, especially when working up ladders, etc. It's also specced for holes up to 16mm. With a lower impact energy than the bigger ones, I'm hoping that it will also be easier to position accurately.

 

[Specialist]

Tool tart

 

[HandySparks]

Tool tart

Oh yes!

 

[Rpa07]

Just taken delivery of the new Makita 10.8V SDS.
Makita HR166DSMJ 10.8v 2 x 4.0Ah CXT Brushless Rotary Hammer Kit - https://www.ffx.co.uk/tools/product/Makita-Hr166Dsmj-0088381838412-10.8V-2-X-4.0Ah-Cxt-Brushless-Rotary-Hammer-Kit

Despite already having a choice of SDS drills, I decided that I needed a little one for fixing holes in hard brick and concrete, especially when working up ladders, etc. It's also specced for holes up to 16mm. With a lower impact energy than the bigger ones, I'm hoping that it will also be easier to position accurately.

That's extremely pretty - me likey! I hope you are both very happy together.

 

[NDG Elecs]

Do you buy them pre-notched or do you install your own custom notches?

A couple of years back I managed to 'install' (cough splutter) a nice notch in my 2 week old wiha snips. Gutted I was! Though they stripped 1.5mm nicely with very little damage to the copper afterwards.

 

[NDG Elecs]

these are my most used. insulated but not VDE rated.

Bahco 9897 Plier Set - 21775 - Pliers & Wrenches | BES.co.uk - https://www.bes.co.uk/bahco-9897-plier-set?ref=gs&gclid=CjwKEAjwsqjKBRDtwOSjs6GTgmASJACRbI3fJXTGcMp9q-ZUsR8X1TqXOo5_B4kIzXCKCJYPEr9O-BoCYMHw_wcB

The bahco snips are nice. I have a compact pair with the with the little spring clip that you can push out of the way. Feel beaut in the hand and keep a good edge. I should use them more often.

 

[Specialist]

Bought this to replace an insulation tester that got nicked & this because it's brand new & at £5.00 too good to miss

 

[telectrix]

Bought this View attachment 36940 to replace an insulation tester that got nicked & this View attachment 36941 because it's brand new & at £5.00 too good to miss

get your labeller out and print MEGGER twice. stick on the offending meters. nobody will know.

 

[Specialist]

I'm getting too old to be a brand snob now Tel, Robin is a brand I've always liked & the Laser one could probably pop up under many brands.
My one that got nicked was a Megger, had the bloody thing from new & all

 

[telectrix]

haha. my megger digital jobby was a fiver, not working although the display lit up. broken lead on 4mm socketinside. 10 mins with a soldering iron, good as new.