Questions and electrical advice in the Periodic Inspection Reporting & Certification - This Section is STRICTLY for testing PROBLEMS which members have occured, misunderstood readings, Periodic Inspection Reporting / Electrical Installation Condition Reports, Mathematical Equations/Solutions, Part P and other legislation which require you to Inspect and Test..
Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs
Hey there, we have some new members posting in the Welcome forum, please head over there and say hi to a couple. Click here to visit the Welcome Forum (this will open in a new window). Thanks.
Normal Threads
yes this is corrct/use one myself
the fluke 1650x and megger 155x
on the load side for the ignitor should be a...
Cowboy vs common sense!
The fact you are on...
NICE ONE!!! hope you stopped to make them cars...
Also just worked out that an R1+R2 of 1.0Ω on...
The PFC would be for each board as you find...
Depending on the extent of the remedial works...
Tested the legs at the CU seperatley? ie, two...
Well I thnak you all for your input it has...
are you confident in what you are doing?
Hi
What page in the regs do i find capacity...
- Mark2009
- 0
- 3K
The install the testing not a problem,the...
ADS,,,automatic disconnection of supply.
- YTSOxford
- 1
- 1K
Guys
What is the Ka rating of a Wylex NB Type...
I must admit having removed the spots i would...
Had this problem on my 2391 the other...
Hi... Don't mess about .. spend some money and...
I had a fault like this recently on an Eaton...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Another poll! Average age of the person on this site.Have there been any deductions made from the poll for those members who are no longer with us?- Latest: snowhead
-
Good Morning Thread - Come say good morning, tell us what you've got on today. :)Today is my last full day at our chalet in Somerset. I've been using up my holidays as we can't...- Latest: Moley
-
Hot Neu. / Reverse when on inverter powerThe instructions we need to follow are for the inverter. You say the fridge requires a ground...
- Latest: James
5 Popular Electricians Tools Thread
-
Automatic gyroscope laser levelAutomatic Gyroscopic Laser Level Do they all automatically stay level...- Started by Dan
- Replies: 37
-
UHF wiring helpMorning all, just after some help with some UFH wiring on my job im...
- Started by SparkDownSouth
- Replies: 5
-
Viper clip gunHello, has anyone bought or used the viperclip gun , it was the one on...
- Started by GB Electrics
- Replies: 18
-
Wire Strippershttps://www.amazon.co.uk/s?k=wire+strippers&crid=T5FZCQEYB3NL which...
- Started by Dan
- Replies: 15
-
Gas Powered Soldering IronI’m looking to buy a gas soldering iron for work as a kit. Would anyone...
- Started by RDB85
- Replies: 21
Some Popular Threads
-
Song words.I mentioned this a while back as a thread on another forum which has...- Started by westward10
- Replies: 796
-
Immersion fuse or MCB?An immersion heater 3kW, say off a final ring. A number of points. Is...
- Started by Steve-S
- Replies: 110
-
Unreasonably high invoice bill from an electricianGood afternoon everyone, I am Alex and I'm new here. I am posting this...- Started by AlexanderSmi123
- Replies: 96
-
RCBO installtion in old MCU following EICR ReportHi, I recently had an EICR done at my property which unfortunately was...
- Started by Deanp35
- Replies: 93
-
3 phase problem after spark did 5 year safety inspectionHi lads 5 year safety inspection the spark put the tails back and later...
- Started by jimthegent
- Replies: 81
-
It's with regret I have to inform you, Christina (Sparkychick) has passedIt's with regret I have to inform you that Christina, the Sparkychick...
- Started by Dan
- Replies: 79
-
UK Identifying live, neutral and earth in outdoor festoon lightingI bought some outdoor festoon lighting a few years ago and the 2 pin...
- Started by Richard Cook
- Replies: 68
-
After a New Consumer Unit, now I need EICR & 100A DP Isolation SwitchTrying to organise a CU replacement at home. It's a 1930s property...
- Started by i3_happy
- Replies: 65
-
Im testing some badges out.You may be awarded some but they will be taken away again so please...
- Started by Dan
- Replies: 63
-
Will you vote?So the general election upon us after a month of farcical campaigns by...
- Started by westward10
- Replies: 57
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.