Socket not working anymore. | Page 6 | on ElectriciansForums

Socket not working anymore.

Post new thread

Discuss Socket not working anymore. in the UK Electrical Forum area at ElectriciansForums.net

R

RDB85

-
Trainee
Joined
Nov 23, 2017
Messages
1,085
Reaction score
168
Location
Liverpool
So last night I noticed that the Socket behind the TV was not working. Plugged in my Kewtech plug tester and nothing. So turned off the MCB for the downstairs sockets. Undone the Socket and its been spurred using new colours from the 13A FCU. Changed the 13A fuse in the FCU, checked the cables and nothing seems out of the ordinary.

There is a socket below that which is wired in Old Colours, which has been there forever. I am just wondering if there is an issue with the FCU, or the wiring itself.

Screwed it all back and then turned the MCB back on. Our house is currently wired in Old Colours, with a Square D CCU. Anyway plugged my socket tester in and again nothing. Would anyone have any ideas what it could be?

Is there any test equipment I could buy to allow me to do some testing, other than a Test Metre as i don't have a lot of money at the moment.
 
Sort by date Sort by votes
Pete999 said:
OP you could try looking at the YouTube videos on Testing etc, the guy I sent you a video of is very good, there are many equally good presenters in there, worth a look if you are really interested, give it a bash.
Click to expand...

Thanks Pete. I’ve seen a few of Chris’s videos before. They are really good. I will have a look at them.
 
Upvote 0 Downvote
Upvote 0 Downvote
So I spoke to my tutor yesterday and luckily they went through safe isolation and then how to test a 3 phase distribution board. I have seen this kit on ebay: Socket And See SP200 proving unit And Socket & See Voltage Tester VIP Pro | eBay - https://www.ebay.co.uk/itm/Socket-And-See-SP200-proving-unit-And-Socket-See-Voltage-Tester-VIP-Pro/293104145650?hash=item443e5e54f2:g:JIEAAOSwKotc69r5

Would that be okay as it seems to be a good price, but I have never heard of the brand. Or shall I just look at a Megger?

Megger:

www.test-meter.co.uk

Megger Safe Isolation Kit

Megger Safe Isolation Kit The Megger TPT420 and MPU690 Voltage Detection Kit is ideal for proving that an installation is dead before safe isolation procedures. Megger TPT420 AC/DC Voltage Tester The Megger TPT420 Two-Pole Voltage Tester can measure AC voltage between 12 to 1000 V and DC voltage...
www.test-meter.co.uk www.test-meter.co.uk
 
As an eBay Associate we earn from qualifying purchases.
Upvote 0 Downvote
RDB85 said:
So I spoke to my tutor yesterday and luckily they went through safe isolation and then how to test a 3 phase distribution board. I have seen this kit on ebay: Socket And See SP200 proving unit And Socket & See Voltage Tester VIP Pro | eBay - https://www.ebay.co.uk/itm/Socket-And-See-SP200-proving-unit-And-Socket-See-Voltage-Tester-VIP-Pro/293104145650?hash=item443e5e54f2:g:JIEAAOSwKotc69r5

Would that be okay as it seems to be a good price, but I have never heard of the brand. Or shall I just look at a Megger?

Megger:

www.test-meter.co.uk

Megger Safe Isolation Kit

Megger Safe Isolation Kit The Megger TPT420 and MPU690 Voltage Detection Kit is ideal for proving that an installation is dead before safe isolation procedures. Megger TPT420 AC/DC Voltage Tester The Megger TPT420 Two-Pole Voltage Tester can measure AC voltage between 12 to 1000 V and DC voltage...
www.test-meter.co.uk www.test-meter.co.uk
Click to expand...
Aa long as the kit complies, but Kewtec for me.
 
As an eBay Associate we earn from qualifying purchases.
Upvote 0 Downvote
Upvote 0 Downvote
Just bought an MK FCU. I’ve now safe isolated the circuit. I’ve split it so I have the circuit for the outside light. Which is to the right and then a circuit coming from the top. Old colours are from the socket below and the new colours are from the spurred socket.

Looking at the back of the MK socket it had the supply and load. I am looking at how it was wired previously

Load would be the outside light and the Supply would be the sockets.

Would that be correct?
 
Upvote 0 Downvote
So the old coloured cables are part of the existing RFC and the new colour is a spur socket from the RFC?
 
Upvote 0 Downvote
Spoon said:
So the old coloured cables are part of the existing RFC and the new colour is a spur socket from the RFC?
Click to expand...

New colours are from the addition socket that is spurred from the FCU. Old colours are from the RFC. As all the sockets downstairs are on a RFC. Which is then has a feed from that socket to the FCU.
 
Upvote 0 Downvote
Socket on the bottom is on a RFC. Which is in old colours. It then has a spur to the FCU above in old colours. There is then flex for the light in old colours in the FCU. Then the final socket is then spurred from the FCU in new colours.

Good news is the outside light works.
 

Attachments

  • [ElectriciansForums.net] Socket not working anymore.
    4A5CDFB2-E203-4E04-B934-393C1E5A3008.jpeg
    1.5 MB · Views: 37
Upvote 0 Downvote
So tried again, bought a new lamp for the outside light. Wired the spur so that the Load Side is the Light and the Supply is the sockets. Tested the socket under the bracket. Still not working with the Socket Tester. Tried the FCU with the new lamp. Nothing.

I then looked at the wiring on the RFC, it seems that one of the live (red) is quite short. It reaches into the socket but barely, so I have got a crimping tool, some blue crimps and some 2.5mm2 T&E. So I am going to try and extend any short cables. Although the socket tester has come back all green lights, showing no faults.
 
Upvote 0 Downvote

Reply to Socket not working anymore. in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

P
  • Question
UK Have a washer and dryer with related power supply issue
Assuming you are a novice to electrics? As in no access to electrical equipment. Plug something in to the sockets that you know works else where...
Replies
1
Views
337
Cbelectrics
C
S
  • Question
Replacing fused spur and hard wired kitchen appliance (fridge freezer) with a standard plug socket
It can be easy to lose the sequence of things. If the fused spur has a neon indicator and this isn’t coming on then I wonder if -the original...
Replies
6
Views
770
timhoward
timhoward

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top