Search results | Page 3

Search results

You will need 50 posts under your account before joining in with this thread because you can't link out without 50 posts first.

  1. Flanders

    Bonding RSJ question.

    Is the metal container itself not an extraneous conductive part ?
  2. Flanders

    Dodgy trade pictures for your amusement! - 1 Million Views!

    They could of saved some money not fitting the bubble level and made the box 20mm larger.
  3. Flanders

    Carry on Shopping.

    I look forward to the day when I come across an emergency light system that has been correctly installed !
  4. Flanders

    Carry on Shopping.

    Think nicebutdim is correct . Sounds like someone turned the last man out switch off .
  5. Flanders

    Toilet facilities on the job

    Or.sn empty cement bag .I believe this is what the guys use working at the top of those big crains
  6. Flanders

    How are we all connecting up our bollards armoured cable?

    Try and fit a cut out if there is room or wiska box with correct gland and and earth plate
  7. Flanders

    Do I need rotary isolator switch?

    as mainline says pulling the plug out with give you isolation. My concern is plugging in a 63 amp plug in on load. I would much prefer to use an interlocking socket . But if it only going to be there for 3 months and notgoing to plugged in and out regularly. Then I cant see any need for the...
  8. Flanders

    Any tips on wiring 3x 2.5mm cpc's into a 13a socket?

    Are you useing the correct size sleeving I see it so many time with 4mm sleeping flapping around on a 1.5mm cpc. Should be quite easy to get 3 x 1.5mm solid cables in one terminal
  9. Flanders

    Seperate test sheet for garage consumer unit on a TT system

    Thanks Yes I read this after I had posted 👍 did not think it was a regulation
  10. Flanders

    Seperate test sheet for garage consumer unit on a TT system

    not all circuit in domestic have to rcd protected. Although they are finding more and more reasons to stop mcbs being used. Ok if the the metal work is an extraneous conductive part than it will been to TT or you can connect to the MET via a bonding conductor. I've do not know of the reg...
  11. Flanders

    Seperate test sheet for garage consumer unit on a TT system

    The way I see it you take you zs of the supply to the garage between the swa and the line . This reading should be low enough to disconnect the supply in the event of a fault on the supply cable. As you have used an Rcbo this should easily be achieved , although as tim says I'm Not sure why you...
  12. Flanders

    C-TEC fire alarm compatibility

    Yes unless you can rewire any of it. Not even sure you can get a 9 zone I think the biggest they go I'me 8 zone . With 4 sounder circuits . You will have to rewire some of it the detector in series
  13. Flanders

    C-TEC fire alarm compatibility

    You have to wire them in series. With the set up you have with 7 detectors and 2 call points so would need 9 zones . The sounders also go on separate circuits
  14. Flanders

    Worth becoming an electrician with no drivers license?

    Have you look into working as a maintenance electrician at a factory
  15. Flanders

    Icertifi EIC cert changes

    That is now the new format for the test results page .Can you not just add the RCBO details in both columns . That's are we do it with Tysoft easycert
  16. Flanders

    Multi door entry system

    Take one multi core from door station and junction box DP on each floor in a secure area or there are also systems that use data so you dont need all the cables
  17. Flanders

    Mounting height for residential three phase dis board

    We use hager all the time very neat with the built in SPD as pc1966 says you can get them with SPD and main switch fitted for about £700
  18. Flanders

    External Lights through timer and contactor via photocell

    You only want one control circuit . Connect the time clock in series with the photo cell and use existing over ride switch.
  19. Flanders

    What type of circuit breaker would be used for a three phase circuit?

    You will need to now if there is start up current on the equipment. To choose what type of mcb / rcbo B C or D .Also Just wondering if 16amp ocpd is a bit close to the limit if the equipment demand load is also 16amps.
  20. Flanders

    How to extend cables neatly when replacing consumer unit.

    No used one of these yet but look a good idea https://www.tlc-direct.co.uk/Main_Index/Consumer_Units_Index/WKCUR/index.html#WKCUR I've always used crimps in the past but find they dont work to well with solid core cable

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top