According to Autodata there is an "ignition auxiliary circuits relay" which could cause loss of power to certain circuits ie: fuses 4,7,19,22,23,24,25 & 30. For more info I would need the model, engine and year & I might be able to email relevant pages to you. If your alternator has 3 wires 1...
The switch and fuse holder are the Click Mode range. You buy modules an fit them into the normal face plates. 4 gang face plate would be a 2 gang back box. Or you could fit the fan isolator and bathroom light switch into a 3gang plate and 2 fuse holders into a 2gang plate next to it in a dual...
I think that if the manufacturer requires their equipment to be fused then they should install the relevant fuse in their equipment, then if the fuse blows it will require an electrician to change the fuse which should ensure that the reason for fuse failure is identified and rectified and that...
I have been asked to look at a school bell system that every now and again the bell will ring & continue to ring until one of the manual bell ring switches is pressed and this then stops the continual ringing. I was shown a timer (Danfoss 841) and there are three override switches dotted about...
I'm using the TP-link ones (4 of) to connect my sky box, tv & blue ray player to the router. The link spans two different radial circuits and manages about 170-180Mb speed on the 200Mb plugs.
I too have had a 60A DNO fuse blown due to water getting through a wall running down the twin and earths an causing a short at the socket outlet. The 3036 30A fuse was still ok.
I also caused a 60A to blow when I hit a diagonally run cooker cable while chasing out ,again the 30A 3036 was intact...
I have a 54 plate kangoo for sale. Roof rack, pipe tube, lined, alarmed, Bluetooth hands free kit, racking & locking drawers, internal 6 rung stepladder storage rack under roof, etc. if you want more details pm me.
Pay the money. When the time comes to replace the work top the hob can be lifted, tilted at an angle and slid down thoroughly the hob cutout in the work top into the unit below. When the new work top has been fitted and a hole cut feed it back through. No need to disconnect the hob.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc