Search results | Page 6

Search results

  1. M

    hot tub fault tripping after switching on

    30 mins in 87.5ma
  2. M

    hot tub fault tripping after switching on

    On now 60.1ma Boiling it up can hear the sizzle & by natural heat trying to push water around
  3. M

    hot tub fault tripping after switching on

    Hi all Well back today electrically disconnected heater from tub & installed link through fused spur to heater, turned on heater working but with earth clamp round L/N supply to tub 50.1ma whilst heater on. So my guess although heater unit is heating & the IR test 400M ohm to earth &...
  4. M

    Tri-flex instead of solid tails

    hi all install few months back used tri rated in metal trunking nice slot direct above head with protection & no gap, Siemens engineer turned up to make connection & install fuses to the head mentioned they will not connect to tri rated anymore. think it was bi rated at that size not tri rated...
  5. M

    Advice on tidying cables

    if you have 50mm behind that pipe then use 100x50 trunking run in behind pipe, run along top of consumer unit & use top entry through the trunking use brass bush or plastic bush, put stop end on the trunking lid on, job done nice & tidy. not had issues with being compliant with latest regs we...
  6. M

    For sale electrical goods 10 pallets worth

    Hi all got 1o pallets + odds & sods on a pallet of fan timers ect & some ip65 lights. can email over quantity lists if anyone interested let me know. all brand new
  7. M

    warranty insurance for PV

    hi all just to let u know today logged in to register a job with ec.. ... workmanship warranty & the price has gone up from £22.00 to £49.00 & another price increase for June sometime another 12%. Obvisouly big increase just glad we are at plot 16-36 & would have been nice to be at 36 but there...
  8. M

    flat sub mains- isolators

    HI J.C.E yes I understand that & also the fact if I allow in the price of the job around £400-£500 for a 200A switch fuse I might not get the job. more worrying would be safe isolation & sending in one of my workers to work on the system that can only be partially be isolated from head to meter...
  9. M

    Recommended Wholesaler for 95mm singles / meter tails & accessories

    hi bigsparks we have been using Eddies for this type of work branch we use holds that size on the shelf, as well as the lugs
  10. M

    hot tub fault tripping after switching on

    thanks will ask tomorrow when I am going round to take a look at the rest
  11. M

    Controlling lighting from 15mtrs away

    Hi Grandfortune I have used a lot of lightwave in last couple of years we had experienced quite a few issues mainly on the switching of LED units but most of that was due to us overloading the units, have since used more & have even used the wireless switch with the relay master & works well...
  12. M

    flat sub mains- isolators

    Hi Cadgey123 we are in the UKPN region & in their literature the wording is "strongly advised to fit a switch or switch fuse, also no recourse to pull the main fuses"
  13. M

    Help! Downlights not working

    the unit would not be fed from a switch fuse by any chance when the transformer went down could of taken out a fuse? also not sure if those are uninsulated cables on the supply side of the transformer not in the protected case but you might want to trim them back later.
  14. M

    flat sub mains- isolators

    Hi J.C.E quite lucky really you got an isolator after the Head before the Ryefield as it is only strongly advised by UKPN, a lot of companies fit the ryefield panel without the switch/ switch fuse. If the Ryefield is a 63amp unit & the correct fuse is fitted in the ryefield panel then it won't...
  15. M

    House rewire. Unsure on terminating at Consumer Unit

  16. M

    hot tub fault tripping after switching on

    no problem, I thought I had missed something really obvious
  17. M

    hot tub fault tripping after switching on

    hi think it was Aqua spa but will check when I go back thanks, probably tomorrow if the rain stops
  18. M

    hot tub fault tripping after switching on

    not a problem was worth a check, I had just run in the new supply myself & tested.
  19. M

    40 Amp MCB supply to a 100 Amp Distribution Panel Help!!!!!!!!

    Hi All you might want to check your contract that you have with the landlord for the premises before you do anything. just done some work on a rented commercial property myself for a tenant on a new lease & the electrics were shockingly bad I mentioned that this would be a good idea to have chat...
  20. M

    hot tub fault tripping after switching on

    yep

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top