Search results | Page 6

Search results

  1. J

    Why 2 hob ratings per ring

    Hi all. Could someone clarify why there is two hob power ratings on AEG IKB64301FB Electric Induction Hob - Black - https://www.currys.co.uk/gbuk/household-appliances/cooking/hobs/aeg-ikb64301fb-electric-induction-hob-black-10186499-pdt.html Also what would be the total wattage. Hoping this...
  2. J

    Strip lights. Connecting sections together

    Nice one Telectrix
  3. J

    Strip lights. Connecting sections together

    N How did you make the connections between the strips Cliffed. Was it Cat 5 and soldered?
  4. J

    Strip lights. Connecting sections together

    Nice job mate ? soldering might be way to go. Found the sort of thing would do job but In 2.5metres worth so alot of cable to lose LED Extension Cable with Connectors 2.5m -...
  5. J

    Strip lights. Connecting sections together

    Soldering. So thinking it would maybe be transformer inside the cabinet, this then connects to first strip and then solder cable of other end and then wire this up and round back of cabinet and solder onto other section of strip. Probably not seeing something completely obvious and gotta be...
  6. J

    Strip lights. Connecting sections together

    Excuse a basic question. But just wondering on people's suggestions for installing LED strip lights under cabinets attached. On both the left and right cabinets there is an existing light. Guy wants replaced with strip lights. There will be three sections, one for left side and two for right...
  7. J

    Help with swa armouring as suitability as c.p.c

    Thanks for clarification PC ?
  8. J

    Help with swa armouring as suitability as c.p.c

    Thanks Ian appreciated
  9. J

    Help with swa armouring as suitability as c.p.c

    Just to clarify PC. If had to go down the earth rod route for the 2 way DB would a 30ma main switch be adequate? I believe there is still requirements for S type 100ma in some scenarios. I think this may be agricultural installs
  10. J

    Help with swa armouring as suitability as c.p.c

    Thanks guys all super helpful. Especially PC for level of detail in responses. Very much appreciated ?
  11. J

    Help with swa armouring as suitability as c.p.c

    Hello all Am trying to calculate suitability of using swa armouring as c.p.c. It is a 6mm 2c supplying a log cabin. From table 54.7 the calculation I need to use to find min csa of armouring is (k1/k2) x S Taking value from table 43.1 for 90c cable I have k1 = 100 and K2 = 46 (Table 54.4) So...
  12. J

    Thoughts on overloaded radial?

    Ok thanks I'll call her and send email confirming this circuit should be powered off an not reenergised until all earthing has been rectified
  13. J

    Thoughts on overloaded radial?

    Complete fail then? I should of walked away?
  14. J

    Thoughts on overloaded radial?

    Pete I have previously been in this situation and others have advised that no c.p.cs at sockets/appliances is not reason enough to not reenergise circuit. If advised client, noted this clearly on cert and put sticker on DB are you saying I shouldn't of done this and walked away from job without...
  15. J

    Thoughts on overloaded radial?

    Hi all Pretty new to working for self. Got call out yesterday for a ring circuit that kept tripping rcd. I identified the faulty cable which had low 0.05 IR reading L to N. I followed this to where next point should be but on opening circuit found only one cable...not good. On closer inspection...
  16. J

    Cooker and Hob help

    They do make life easier ?
  17. J

    Cooker and Hob help

    Cheers guys really appreciated will make sure get 2.5 heat resistant flex so will have 2.5 c.p.c
  18. J

    Cooker and Hob help

    Cheers. Combined though they overrate the 32 amp breaker for cooker circuit don't they?. I Could spur out from low level connection point for cooker but where do I get my supply for hob. Sorry edit no this can't be case as only 16amp for hob although ratings for ring are 2.2kw 2kw 2kw and 2kw. I...
  19. J

    Cooker and Hob help

    Afternoon all Been asked to connect up cooker and Hob. Guy only has one 32amp cooker supply in 6mm. Has isolation point and connection point at low level Spec for cooker is 2.4KW but has 13 amp plug fitted. So from that i read it as this cannot be connected up to 6mm connection point and has...
  20. J

    Neutral at dimmer switch?

    Is there anybody that can describe to me how this fault was occurring. For the life of me I can't see how a dimmer switch connected on one circuit could be tripping the rcd out on a different one?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top