Search results | Page 9

Search results

  1. lurch

    dot and dab. . . . .

    . . . . getting back to the original post, there are a lot of opinions , but no real definitive answer, and by that I mean there does not seem to be any direction from the regs book or from a building regs perspective, unless I am missing soemthing?
  2. lurch

    dot and dab. . . . .

    pride in yer work matey. . . . pride!
  3. lurch

    dot and dab. . . . .

    IMO no.
  4. lurch

    dot and dab. . . . .

    I do belive OSG says T&E is generally suitable "on exterior surface walls, boundary walls and the like" with just a comment that protection from sunlight may be necessary
  5. lurch

    dot and dab. . . . .

    yes the capping is one reason to protect from the trowel. . . but there is no trowel with dot and dab is there .. .
  6. lurch

    dot and dab. . . . .

    that doesnt make it right tho!
  7. lurch

    dot and dab. . . . .

    mmmmmm, but you wouldnt run t&e surface in the sun would you?. . . . I wouldnt.
  8. lurch

    NICEIC Certification Scheme Questions for niceic inspector

    hahahahah. . . . . . classic
  9. lurch

    dot and dab. . . . .

    just to expand. . . . the contractor that uses caping insists there is a reaction with the dot and dab adhesive and the cable pvc, hence capping.
  10. lurch

    dot and dab. . . . .

    I do some sub contract work for two different contractors. One of which insists on using capping in dot and dab buildings, the other does not. Who is correct?
  11. lurch

    air source heat pumps

    in isolation the instruction for each is straight forward, however the ecodan drawing does not indicate how to integrate the underflor stuff. my assumpyion is that the u/f stuff in fact comes off the heating channel on the programmer and assumes the positioin of a room stat?
  12. lurch

    air source heat pumps

    Hi all Been a while since I have posted, so here goes. I hace a Ecodan Air source heat pump to wire up. I have had no experience with these until now. However, although the wiring diagram is fairly stright forward, it does not accomadate the danfoss wiring centre for the underfloor heating...
  13. lurch

    Electricity board

    Hi I missed the board today and they have advised the builder they will be providing a 3 phase 75kva supply. I reckon the formula to work out the line current is: I= kVA x 1000 /415 x 1.732 therefore 75 x 1000/415 x 1.732 = 313 amps now I think I am correct in saying this is approx...
  14. lurch

    combined smoke/carbon monoxide alarms

    Hi Can someone advise where best to get combined mains powered battery back up smoke/carbon monoxide alarms. Thx in advance.
  15. lurch

    any body encounter this?

    thanks to all that added constructive comments to this post !!!!! Mines a cold one! Ariva derci
  16. lurch

    any body encounter this?

    yes it is inside the property and ex council. the skeleton unit sounds just the job, and although MK have a unit that can be stripped down I am not sure this is the correct one . . . http://www.mkelectric.co.uk/Documents/English/EN%20MK%20Catalogue/Sentry.pdf if any body has a link to the...
  17. lurch

    any body encounter this?

    I have been asked to do a consumer unit swap out, but I have not encountered this scenario before. Take a alook at these photos', and if anybody has any answers i would appreciate some pointers. . . . thx in advance
  18. lurch

    definition of safety circuit

    yes! many thanks
  19. lurch

    definition of safety circuit

    yep had a look at that and typically it is open to interpretation.
  20. lurch

    definition of safety circuit

    Can somone confirm exactly waht is meant by "safety circuit" under "prevention of mutual detrimental influence " in the schedule of inspections please. thanks in advance

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top