Search results | Page 10

Search results

  1. UKMeterman

    Metering electricity usage

    It may be an idea just to check that the wiring can't be tampered with and you have some seals on the meter, saves arses both ways.
  2. UKMeterman

    3 phase domestic job

    If they are out in the sticks try selling them a ground source heat pump and thermal store for most of their heat. Ground Source Heat Pumps | GSHPA is the focal point of the ground source heat pump industry | Renewable Heat | Renewable Cooling | GSHP | Ground Source Heat Pump Systems -...
  3. UKMeterman

    3 phase domestic job

    The customer might apreciate a couple of these fitted to key circuits Rayleigh Instruments RI-F384 1 & 3 Phase Meter RS485 Modbus RTU & Pulse Output - https://www.rapidonline.com/rayleigh-instruments-ri-f384-1-3-phase-meter-rs485-modbus-rtu-pulse-output-23-1534 so the sub circuits can be...
  4. UKMeterman

    Advice Wanted - VERY High Earth Resistance Problem

    Hi, This link might give some ideas. https://www.wbdg.org/FFC/NAVFAC/DMMHNAV/hdbk419a_vol1.pdf
  5. UKMeterman

    A short video on why following proceedures matter

    The fuse on the pole should have been pulled and a notice like Google Image Result for http://farm3.static.flickr.com/2854/10178983846_503cc1b2a9.jpg - https://goo.gl/images/nL9i3q displayed and an isolation permit obtained before working on the underground service.
  6. UKMeterman

    A short video on why following proceedures matter

    Have a watch,
  7. UKMeterman

    Lamp post under mains pylon question

    Sometimes people just don't get it unless it is shown in all it's detail.
  8. UKMeterman

    Lamp post under mains pylon question

    I would strongly suggest the following: 1. Get a site visit from a Authorised Person at the DNO. 2. Once the hight limits have been confirmed then think about folding light columns that meet the hight limits. 3. If the customer doesn like the cost of the DNO visit then show them Horrific moment...
  9. UKMeterman

    One way to check if a HV cable is live

    Could I please have a review of PPE and technique shown here? https://www.youtube.com/watch?v=Sd-HAbPp0fg
  10. UKMeterman

    What is this?? Not sure what it might be

    Hi, You do need to get an electrican to look at that pronto. I can see evidence of severe overheating.
  11. UKMeterman

    RCD / LED problem

    The sunbeds will have lots of filters in them each leak to earth. Fit rcbos, and if the customer wonders about the extra cost then explain if a bed goes faulty then he will only have an issue with 1/4 of his beds not all 4.
  12. UKMeterman

    The aftermath of a large SWA cable tied to a bridge snagged on a passenger train....

    The fixings of the cable tray were in a poor condition of the accident. The locomotive was a freight locomotive and can geneate 14 tons of pull force, it would take 3 tons to snap that cable...
  13. UKMeterman

    Glass washing machine 3 phase 63a per phase

    An interlinked socket is a good idea, yanking 63A out under load will give a bit of a flash and stuff up the contacts.
  14. UKMeterman

    The aftermath of a large SWA cable tied to a bridge snagged on a passenger train....

    An SWA feeding a signal box was cable tied to the cable tray on the side of a footbridge at a railway station. A train passing through the station snagged it and it went ping and recoiled down the platform.... Report 06/2018: Passengers struck by a flying cable at Abergavenny (Y Fenni) station...
  15. UKMeterman

    Flickering LED Fault cause found, I think.

    Put a power quality analyzer on the circuit. And leave it connected for 24 hours, it will tell you if you do have a power quality issue.
  16. UKMeterman

    Oven trouble need larger than 13a

    Another idea, look at the oven and check the max demand on the rating plate, often it is less than 3Kw. If it is 3.6Kw, fit a 16amp double pole MCB in suitable encloosure at back of adjacent cupboard and feed this and hob from exisiting supply
  17. UKMeterman

    Megger PDA1 Power disturbance analzyer for spares / repair

    Megger PDA1 power disturbance analyzer with internal printer. | eBay - https://www.ebay.co.uk/itm/173260287040
  18. UKMeterman

    Megger PDA1 Power disturbance analzyer for spares / repair

    Hi, It is currently on ebay with a £10 reserve.
  19. UKMeterman

    Megger PDA1 Power disturbance analzyer for spares / repair

    Hi, I have an old Megger PDA1 Power Disturbance Analzyer for spares / repair, it does power up but suspect the nicads are shot. Any offers?
  20. UKMeterman

    DCP 161 implementation April 1st and calculating KVA, maximum demand

    Fit one of these to the main intake as a check meter, I think it does peak KVAR and KW . Rayleigh Instruments RI-F384 1 & 3 Phase Meter RS485 Modbus RTU & Pulse Output - https://www.rapidonline.com/rayleigh-instruments-ri-f384-1-3-phase-meter-rs485-modbus-rtu-pulse-output-23-1534
View older results

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top