Lots of suppliers carry the standard range of Wago connectors, and although I had seen these before, never realised they were made by Wago.
Found them last week on ************, and they are excellent. Trivial and fast to fit, and makes everything really tidy, and pretty if you buy the coloured...
Evening all,
This is my first post and im just after abit of advice. I have installed low level brick lights, and was wondering what the best method was as to wiring them.
There are 5 of them and the are knee high. I am going to go from the consumer unit to wago connectors in an enclosure...
I've been asked to install Zehui Cool White 3 X 3W Led Underwater Spot Light 12V 9W. I'm a bit concerned, firstly, it has a very short lead for an underwater light (200mm), what sort of connector should I use? Secondly, it has a cpc within the flex but there is no continuity between the cpc and...
Just a quick question..
Just wondering, if was to replace a single socket that isnt working for a double socket, the cable are too short, are we allowed just to extend the cables with a connector block in the socket?
Sorry if daft question
Has anyone got any spare Sunclix DC connectors they don't need for an SMA.
Got an SMA 3000TL 20 to install but somehow the connectors have gone missing (it has been knocking around the storeroom for ages!).
Hi guys
Just had a call from a friend who's brother as fitted a 4Kw system to his roof. He would like me to test it. I've not done any work on PV systems and not sure what tests need to be done. I first thought an installation cert should be done but after reading bit on this site im not so...
Morning guys, I've never signed up to these forums before but most of you on here seem semi sensible:wink5: so I thought I'd give it a bash.
I've had an email from electricfix about cheap wago connectors, £85 for the 690 piece contractors box, is that a good price? Normally buy the individual...
As above, 1000 5way push connectors for sale. they come in boxes of 50.
£4 including postage for a box of 50.
same as HELACON PUSH WIRE CONNECTOR 5 WAY (BOX 50) - Helacon Push-In Wire Connectors
cheers,
tim
Had the local wholesalers premoting his varied range of Wago push fit type connection blocks when he showed me one that had me thinking that to use it correctly you would contravene the regs... your thoughts...
What he showed me was a connector for downlight where its got entry points on one...
Hi all
Joining a looped neutral in a plaster mounted lighting switch box.
Back in my sad old day... we used plastic connector blocks, which I seem to remember were binned a while back.
What are people using these days?
I watched the sparky on a site the other week crimping all his connections...
not full selection and more expensive compared to tlc, but may be handy if you run out and have a branch near by.
222 Lever Connectors - Search Results | Screwfix.com
I have been working on one of those jobs where the customer wants to add new outlets on a ring which is now largely behind new plaster which the builder is very protective of. we can connect under the floor to add new outlets, but the floor is going to be covered with a laminate. I guess that...
Hi all, FIRST POST, yay. The problem I have is a 17000tl that will not work because the device shows 'ISO' is falling below 1000. Samil have a UK tech guy. He started last week, I had him on site today, a good guy, willing to help and learn but neither he nor I no what 'ISO' is or what it's...
garryon
Thread
connectors
electricians' talk
fault
insulation
polarity
resistance
solar
Hi all hope you can help came across a rewire were all the down lighters have been wired up with strip connectors is this acceptable under BS7671 and dose this comply as an enclosure reg 5265 good advise please
Some Wago connectors are rated at 24 amps and take cable up to 2.5mm. Would you use them on a ring main circuit?
My concern is that if one leg of the ring went open circuit, the wago would be then used on a radial circuit protected by a 32a mcb.
Bul
hi all just wanted to check something re wago connectors (lever type) i cant find anything in the regs that suggests that they cant be used inside a internal conduit box or suitable enclosure for connecting single core cables to flex for outside light. the box will be accessable for inspection...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc