Hi guys, I was hoping for some guidance in installing a light switch. This is my first post, so I hope this is in the right forum.
In my bedroom, I have MR16 LED bulbs and a light switch by my bedroom door (on/off switch, no dimmer) and another one next to the bed (dimmer switch) that control...
So I recently changed my light switch and thought it was OK but in the evening the lights started flickers and when I switched on one light it turned another one off in the bathroom so I presume I have done something wrong even though I though I matched it up in the same way as my old switch.one...
Hi all,
I have a double light switch that I attempted to fit a double dimmer switch by switching the wires over exactly as they were on the original but had no luck.
One of the lights worked but the other didn’t, as per the pictures the one that worked is the one on the left as you look at...
What is the oldest dimmer switch you have seen in use recently?
When did you install your first dimmer? (Veteran sparks only)
I ask because a friend recently sent me a link to a 'news' story about an old toaster still in use, which I don't even really see as an old toaster (OK, yes, it's older...
Wondering if anyone else has had this, getting 24v between live and neutral at pendant when dimmer is off, which means the light isn’t fully going off it’s still sort of glowing. When I replaced this for a regular switch it sorted the issue, just wondering if anyone else has had this and if just...
Hello,
I’m trying to wire an LED dimmer to replace the older dimmer which is running halogen bulbs. All the wires are the same colour, brown. Two wires go into the COM terminal, and one goes into L2. My new switch has COM, L1 and L2 along with a screw on the metal plate for an earth. I presume...
I have two switch for my ceiling fan one for fan another for light.
Can I switch the light button with any other dimmer switch without doing anything in fan?
My fan is on high ceiling almost 20 feet up so I did not want to do anything with fan.
Hi,
Would like some advice please on the following issue.
2 (dimmable)wall lights which are plugged into a mains socket via a 5 amp fused plug. At the present time the two lamps are switched on and off by the plug socket. They are wired as follows. Lamp 1 is connected to the mains, and Lamp 2...
As I tried to summarize in the title, I'm having an interesting buzzing issue in a residential home.
Problem: When Lights are turned on, all 3 switches controlling the same load start to buzz, as well as the breaker the lighting circuit is on. Buzzing stops on all devices and the breaker when...
Three images are attached here. Two show the dimmer switch connections and one shows one of the two light fittings.
There are two identical light fittings (six total bulbs) on this dimmer switch. It has one knob only but it sorta works. It's been like this for some time but I think it's how I...
I installed a 3-way Lutron dimmer toggle switch in my basement to control 5 dimmable LED track lights, LED track lights slowly brighten to near 100% when I dim to around 50%. If I dim below roughly 25% brightness then they tend to keep their set level. Initially they worked fine. I installed two...
Hi All,
I have just moved into a new house and the lights in one of the rooms don’t appear to be working, than on top of that I am rubbish at electrics. The room has a light switch as you enter the room and a dimmer switch at the other end of the room. I am not worried about the dimmer...
Hi guys, just installed new JCC V50 down lights with two 2 way brushed brass dimmer switches from Knightsbridge. When I turn one of dimmers up fully it cuts the light out. And then sometimes they flicker on start up… then if I have one switch dimmed to the lowest and the other is switched to the...
Recently moved into a new home and replaced the main light fitting in the sitting room. We replaced it with this dimmable LED fitting:
ENDON RUBENS 6LT SEMI FLUSH 79469 - Indoor | Ceiling Lights -...
Hi all,
I have an issue with my bathroom dimmer switch. The issue is that there is a humming/buzzing noise coming from one of the lights. Even after replacing the lightbulb several times and removing it completely - when the dimmer switch is turned as far right as possible, the buzzing starts...
I am trying to change over a standard switch to a dimmer switch, please see images attached, the current one is the image with the wiring in, and the new switch is the one with the blue boxes, please can someone help me to wire this onto the new switch, i have tried it already, but it tripped...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc