Wanting to swap single on/off switch to a dimmer switch. On getting old plate off (see picture) there were more cables than I was expecting and I decided to stop and ask advice. Second picture is of dimmer purchased, Could anyone please tell what cables go where? Many thanks.
Hello all,
I need to re-wire a dimmer switch to be LED compatible. Opened it up and it has two blue colored wires going into one input. Any clue on what is going on here? Should I copy the same thing to the new option?
See old and new below.
I wired a house about a year ago, We recently got a call back because the led can trims are glowing when the switch is off. We have figured out that the can trims that glow when their switch is off only glow when the dimmer in and for a different rom is turned on. The led can trims are listed as...
Hello, I need some help wiring a dimmer switch and outlet to 3 light fixtures. Attached is a picture. There’s a set of wires coming from the right, very top and left side of the board from each light fixture. These go to 3 vanity light fixtures. I’ve gotten the lights to turn on but the dimmer...
Hi guys. Sorry for the sad post but I thought this was a simple plug and play...
So I have two light switches in my basement living room controlling one light fixture each independently. They are pot lights and too bright so I decided to buy replacement dimmers for both.
Again each switch is...
I have 2 (one gang) on/off light switches in my lounge (one at each end of the lounge). I'd like to change one of them over to a (one gang, two way) dimmer switch. One back box has lots of wires - I think the wires are going in and out of there. The other back box has fewer - I think this is...
As the title says today I replaced a simple 1 way 2 gang switch with a a 1 way 2 gang dimmer switch.
The first switch controls 2 ceiling lights with gu10 fittings which dim fine.
The second switch controls under cupboard lights which are fluorescent lamps, they originally come on and work...
Evening all
I went to someone's house today to look at a lighting circuit for them that's is tripping rcd. While there on a circuit as far as I can make out at moment that is not interconnected in anyway to offending circuit they have 230v at a switch between switch feed and what I think should...
Just moved home. Does anyone have any information on this switch. It looks like a dimmer. Its feeding 3 sets of halogen spots but isn't working properly. Bright then dark etc etc. I cant find any info on it anywhere. Please help.
I want to set up a simple plugged in to socket cable with dimmer switch box in the middle and a straight batten with bulb in for some bulb photography i need to do. I have a plug, two core wire, dimmer switch with box to encase it and a straight batten. Want to be able to dim bulb low. Can...
I put in led high hats in my soffit outside. They are operated by a timer switch. The problem is the lights are too bright. I want to add a dimmer switch to tone down the brightness. I tried to do it myself by adding a dimmer switch in between timer and lights. I tried all combinations...
Hi all,
I'm a bit of a novice when it comes to light switches but managed to wire a single normal switch a few years back so thought I'd be okay with tackling this job but in truth I can't work out where to start!
The issue is that in our living room we have a double dimmer switch but the...
Long story short i had a friend helping me out with some DIY today and I have realised that he left the wiring like pictured. I have and voltage tester so i have worked out that the middle red wire is the live one.
Long story short they are now not working (i have tried some variations based...
Hello there,
I am quite handy but electricals is one thing i have never messed with and im needing a bit of help.
I am making a couple of incubators for gecko eggs. I am using polystyrene boxes and want to put lights into the top of them. I want to use the light fixtures which plug straight...
Looking at V-pro dimmers. I have 4 EN8 downlighters in a circuit which are 8 Watts. Would i be correct is assuming the total watts in circuit is 32, and therefore would require a 400w dimmer switch as i read somewhere you divide the total by 10%.
Hello peepz
Im new so howdi to all sparkies and experts in ere, keep up the good work.
I want to tackle swapping a single light switch in my kids bedroom from standard switch to dimmer switch. I bought a dimmer switch, 25m back box and a dimmer led light bulb. All the videos ive seen and...
Hi every one, I had a bedroom light switch replaced with a dimmer by a qualified electrician some months ago and want to get another in another room. Before tackling this myself I thought I’d look at the bedroom dimmer as a guide after reading up about dimmers online. Just two wires so looks...
I had an electrician out to do a few jobs one being fitting some dimmer switches. They all work fine apart from one.
There is no buzz coming from the switch as with the others, I can get him back to fix it but if its an easy fix I'd like to rewire it myself to save time.
Photo attached...
ive just installed 13 4w LAP downlights with are controlled by a dimmer switch. When I turn the switch on I can turn the brightness up no problem but when put it down low they still seem bright, could this be a switch issue? Thanks in advance
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc