Hi, a few months ago this fan was installed in my bathroom, but it seems to be less effective than the previous one. The humidity setting is meant to be adjustable from 50% to 95% (i.e. it will come on either at a low or high level of humidity). Can anyone tell my where the arrow has to point to...
Hi to all,
If extractor fan in bathroom is autonomous does it still require isolator switch or usual fused switch will do? It runs of 12v transformer outside. Not being linked to light switch. Can be fed from either circuits.
Hello to all.
I know now that 1mm T&E would be better for lights, but legally is 0.75mm Flex in conduit behind tiles and tile backer sufficient for led lights (6w) or Extractor Fan (4w)?
1 out of 3 quoting electricians said that those need to be replaced. Is it really that bad? Looking at the...
Customer has a toilet block with 1 inline fan currently doing 1 toilet only.
Set up as follows
Pir turns lights on and last light turns fan on. Perm live to fan.
Now they want 2nd toilet on same fan...
Hi. My current axial Xpelair model 92614AW ground floor bathroom extractor fan is installed in zone 1 and doesnt work efficiently at all. Its wall mounted but doesnt go straight to the outside as there is now an extension on the back of the bathroom. I think either I need to get a more powerful...
I've just had a look at an extractor fan not working. As per title it's a bungalow and there are no external walls, so it vents through the loft and roof.
Earlier this year the customer requested a more powerful fan and the sparks fitted a Manrose inline unit. Fair play.
But the thing is...
Hi all, I did train as an electrician but never worked as one so my experience is limited and ive not done anything for a while now.
I have an extractor fan in my kitchen that comes on with the lights and its damn annoying. I did disconnect it a few years ago but on a recent inspection the...
Hi all, wonder if someone can help me.
I've bought a bathroom extractor and I do have the wiring there already (previous extractor was there) but I stupidly did not review it before taking it off and now I'm lost.
I've essentially got a single light switch outside the bathroom which controlled...
Hi All,
Bit of a tricky number. I have recently installed lights / fans /toothbrush chargers and shaver sockets to a bathroom and En-suite. The house had been rewired a few weeks before(not by me). I tied into the existing lighting circuit and everything works fine apart from both extract fans...
Hello and good evening
I have been asked to take a look at a Sunhouse sshe125 storage heater.
The heater’s fan is not working and Dimplex have suggested the fan needs replacing.
This afternoon I bench tested the fan motor and it operates, so I am now scratching my head.
The unit heats up...
Part 1.
I Have 2 red wires and one brown going into my ceiling pull chord UK light switch in bathroom. BROWN AND RED into L1 and RED into COM. Will test when get my meter (assume I need pull out joint wired wires first to seperate and run an earth into bathroom first before I try test .) but...
Evening all....
My son is 14, he seems to be taking ultra long baths and showers and the bath/shower room is drenched afterwards.
I have just bought a pretty good inline fan and was planning on fitting it on its own switch as the existing lights are on a dimmer. I would love the fan to come on...
I have absolutely zero experience with MVHR.
The issue I have in my own home is as follows.
Log fired burner in kitchen supplies hot water and heating via a thermal bank / store. Approx 2kw to the room and 9kw to the water.
If we want the heating on then this is on, combined with all the...
New fan with light - and remote.
Wiring in first pic from manual. Black, brown, blue, white.
Second pic - my light fixture pulled down with wires. Black wire not connected to anything.
Two switches on wall. One turns on black/hot to two light wires. Other switch only turns on single black wire...
Hi guys,
I'm an apprentice electrician and have been doing some basic work on my bathroom with what I've picked up on site.
I've split the mains supply (1.5 2-core) in a junction box and have fed the light pull cord, the mirror-light and the fan isolator pull cord.
I want to power my timer...
I've got a 3w LED fitting (shower light, and fan combined), but a replacement lamp flashes. Why? What can I do to get a new one to work ok?
Thanks. Colin
Hi,
So I'm simply trying to replace a noisy fan in my mini cooler as I think the bearing has gone.
Seem a pretty simple case of open it up, unplug and remove the old, insert and plug in the new, job done.
However, for some reason, the new fan(s) doesn't spin up.
The only difference in the fans...
Hey everyone. Got a head scratcher for wiring a fan with a speed control with a run on timer on site today. I, and two spark could not get it working at all. We wired it according to how we think it must be done according to the wiring diagram supplied. We can get the fan to turn on. But no...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc