oven | Page 3

oven

Recent contents View information Top users
  1. O

    MCB size and wire size for an electric oven and induction hob

    Hello I have two new appliances Electric oven rated at 3.95 KW Induction hob rated at 7.2 KW total of 11.15 KW Currently it is on its own supply with a 10mm Twin and Earth and the MBC is 32amps Can you please advise if the following Cable size is sufficient ( behind plaster ) MCB Amp...
  2. M

    Oven dying then coming back to life then dying again like the terminator at the end of the film

    Hi Our oven stopped working suddenly including the clock. It was on the fan oven setting at about 150 degrees. I checked the fuse board - it had not tripped. A little bit later when I used one of the gas hobs (the gas hobs have an automatic igniter) the oven came back to life ie clock came back...
  3. S

    Installation about a new Range oven installation

    Hi I need advice. I am about to buy a new oven. I am moving into a new home. The original owner removed their 90cm flush range oven when they moved out. I didn't think anything about this until PC World told me that their engineers will not install an oven unless there is a 10mm space between...
  4. C

    no oven for xmas :-( new 16amp oven on onto old 20amp breaker.???

    Hi there My old oven broke just in time for xmas😭😭😭 (murphys law) Ive picked up a new one which is rated at 16amp. The old oven came off an independent circuit. 20amp breaker with 6mm from board to isolator and 6mm to rear of oven. Is this just a case of just hardwiring it in or is it a bigger...
  5. A

    Hob/Oven Circuit issue

    Hi all Some advice on this would be great. Due to wire a kitchen from scratch and in a pickle over the designing of the oven and hob circuits due to having to carry out first fix before appliances are agreed on due to time restraints. My original thought was to run a 6mm cable on a 32amp...
  6. vidriduch

    Another oven installation

    Hi, we are replacing our old hob and cooker and I need a bit of help, to make sure all is safe. This is the oven and hob specs: AEG IKB64401FB 60cm Induction Hob Amperage 32A Aperture needed H4.4 x W56 x D49cm Burner power Left front - Power/Diameter: 2300/3700W/210mm. Rear - Power/Diameter...
  7. J

    Why does my neff oven trip every few weeks?

    Neff oven trips rcd every few weeks at about 5pm…tea time,when oven set to high temp.and temp. rising,..not sure if set temp. has been reached. The rcd can be immediately reset and oven will stay on,..for another few weeks? help required
  8. lozarus

    Oven Replacement - RCD?

    Afternoon all. Apologies if this is a stupid question. I'm currently half part way through completing 2391 (second exam tonight) - so may be getting myself in a tiz overthinking things. Either way, thought I'd put it out to the group. Task is: Straight swap of existing x5 ovens with new -...
  9. C

    Zanussi oven tripping the RCD, Help im living on Pizza

    Hiya, I have a 5yrs old Zanussi single built in fan oven. It has recently started tripping the RCD at the fuse box. Thinking and researching i decided to replace the main element which i have done. The oven works for about 15 mins the fan comes on after a couple of minutes and seems to be...
  10. C

    Replace Large Oven or Dryer Breaker

    Hello and Thank You!!! Reason: I am installing a Generator Hookup panel. I am installing a 30Amp breaker to hook up the generator. I want it at the top. I need to make some room. QUESTION: Can I replace these larger Oven and Dryer breakers with smaller same amperage new breakers? Why do...
  11. A

    Help changing the heating element in my oven

    The original heating element for my oven is no longer available and the replacement part has different connections. Im looking for advice if i can still connect this as a DIY project or should i get in a specialist? Ive attached photos of the old and new elements and connections, the original...
  12. J

    Can any electrical oven be hard wired?

    We do not have an outlet in the area behind the oven. Our current oven is hard wired. There is an outlet just above the counter near the oven area. Can a new oven be plugged in that outlet? Can any oven be hard wired if we choose to do that? Is it easy to install an outlet behind an the...
  13. B

    New member fitting single oven flex

    Hi all just here as an enthusiastic learner/diyer to gain knowledge and help on bits and bobs At the moment I am confused I have a new single electric oven totals 2.2kw, I have 6mm cable from mcb on a 40amp breaker on dedicated cooker point on board The oven has 1.5mm flex no plug and the...
  14. S

    Don't like how kitchen fitters have connected oven and hob

    Hi all, Recently a mate had a new kitchen fitted, he's gone for an induction hob and pyrolytic oven, no gas at the property. At 1st fix a single 32A 6mm supply was installed to run both the oven and hob, the electrician already knew the exact specs of the appliances to be installed, and no...
  15. D

    Oven lamp glass covers

    My parents and my oven both need new oven lamps but both mine and their glass lamp covers are completely stuck / cross threaded and won't come undone to get to the lamp. Is there a dang secret to get these glass covers off ? I don't want to force it and end up breaking the glass
  16. S

    UK Oven, Hob & Hood connection

    Hi All, An easy one for you guys I expect... I have 6mm² to kitchen, RCD protected, B32. I need to provide supply to an oven, hob (ignition only) and hood. Oven and hob have plugs attached, hood doesn't, but I've seen elsewhere on this forum that one could be fitted (with a 3 amp fuse). Is...
  17. T

    Defy dgs906 gas electric oven

    Hi, I am trying to figure out if my defy dgs906 gas/electric oven is single or 3 phase. The manual says it can be either or but the L1, L2 and L3 are not bridged so I assume its 3 phase. I am not doing the wiring but need to pull the correct cable before the electrician comes to install as I...
  18. P

    Hot hob issue after new oven

    This is a strange one and before I contact the company who installed my new oven I wanted to ask for some advice. Ever since I had a new oven installed my electric hob has been considerably hotter than it was before, even on the lowest setting food burns very quickly whereas it never did before...
  19. D

    Two 16amp oven installation

    Hi, I've searched these forums and have found quite a bit of good information, but not specifically to my query. My house is about 9 years old. The kitchen has a dedicated cooker circuit, which has a 32 amp MCB. The cooker circuit only has two single 13 amp sockets on it, and each of these...
  20. G

    Oven Tripping RCD help!

    Hi all, Was wondering if anyone has come across this before and could maybe help - Its a new one to me! Customer recently altered layout of their kitchen slightly and bought a new AEG single oven and a new AEG micro / grill oven after doing away with some gas appliances. 1 of the new electric...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top