repair | Page 6

repair

Recent contents View information Top users
  1. UKMeterman

    Megger BM203 bin or repair

    Hi, I have a Megger BM203 which has a faulty display. Should I just bin it, or send it for repair, what do you think? Thanks
  2. M

    II&TEE (PAT) Editable Equipment, Repair and Faulty Registers

    Based in the model forms within Code of Practice for In-service Inspection and Testing of Electrical Equipment, 3rd Edition. If there any errors or bits I have missed then let me know. Just to add, I only managed to create these forms because TesterSteve started it all with the Editable EICR...
  3. Tuttle

    Megger 1710 Warranty Repair - how long will I be without my MFT?

    Tried to get my Megger 1710 calibrated last week, only a year old and apparently it's faulty :bigcry: The 100mA RCD test won't trip, the calibration guys have sent it back to Megger for repair under Warranty, but they didn't know how long it will take. Anyone had a Warranty repair on a Megger...
  4. static zap

    White Goods repair forum -- for a retired engineer type

    Please does anyone have any suggestions of usefull / helpfull Repair forums For an Electrically - Electronically capable DIY Fixer to extend the lives of OLD well made appliances (I realize that buying new will be easier / cheaper ) I wish to feel the thrill of success ,no time-limits ! No...
  5. D

    UFH Cable Repair

    Hi i am new to this forum and am looking for advice regarding the repair to my UFH cable (150W). I had just finished laying everything .... insulation, UFH matting, latex, ultraflex adhesive, tiles and you can guess what happened ! I was cutting the channel to bury the cable and the saw...
  6. D

    Anyone know a reputable tv repair man in ruislip/middlesex area?

    Shot in the dark but thought i'd ask the question. I need someone to repair my plasma tv and dont know where to take it. If anyone can recommend somewhere then that would be appreciated! thanks.
  7. UKMeterman

    Testing of 12VDC power supplies after repair

    Hi, If I repair say a 12VDC SELV floating mains power supply in a metal class 1 box what tests should be applied after a repair. I am thinking earthbond 100mA or 25A and IR test L+N to E with output also connected to E. What voltage should be used for the IR tests LN to E 500V DC or 1.4kV AC...
  8. i=p/u

    tool repair

    hey, hi, yo... i have a hitachi H45MR hammer drill, and when i pull trigger the fuse pops so obviously shorting out... any fault finding techniques guys, ? the person that gave to me said needs new carbon brushes, but hes a plumber.. is there any good repair shops i could consider sending...
  9. D

    Zoning and other trades ......!!!!!

    :sad3::sad3::sad3::sad3:..... crap morning but saved by been prepared, was pad-sawing out a socket box in dot and dab about 1m from a window with a radiator under it, then psssssssssssssss water squirting out, was hot so isolated boiler to drop pressure and bashed out a large section of wall...
  10. L

    Fluke query

    got a fluke 1653 with "err 1" when turned on does anyone know whether this can be rectified at a reasonable cost or is that good night vienna ???
  11. W

    Does CIS apply to maintenance and repair work?

    Just after a bit of advice... The majority of my work is domestic, contracted directly with the householder (no need for CIS). I also have a fair amount of work from buy-to-let landlords (again, no need for CIS) As I didn't think I would be involved in new-build work, I didn't register...
  12. A

    Lightning conductor repair on a Church

    Its beyond my scope, so do ant of you fellas know who does such work in East Kent? A 10metre section of bare stranded copper has been nicked, this heads off into the heavens directly to the spire & its a long long way up.
  13. M

    megger mft1730

    hi i priced a mft1730 today and the wholsaler said that theyre having problems with them and to buy somthing else? has anybody heard about this? cheers mike
  14. S

    To change or repair my van

    Hi all i currently own my Vauxhall Combo but it really needs some work. I have been thinking of changing up to a Vivaro so that I can carry more / access it easier. To do this would mean leasing / loan My question is for those that ave changed from a small van to a larger one Did it help your...
  15. telectrix

    megger repair

    as title. does anyone know of a good repairer for my 1552. it's fine on all ranges (calibrated), except for continuity, where it reads incorrectly and erratically. e.g . on a 1.0 ohm resistor, it will read anything from 1.3 to 1.7. it's not anything to do with nulling the leads or the leads...
  16. K

    Repair Question

    I was replacing the circular element on my beko fan oven and noticed the element sticks out at an angle from the back of the oven when i replaced it. Now it will touch the metal plate that covers the element. I cant find any pertinant info about this problem so im posting here to find some kind...
  17. G

    AAAAGGGHHHH!!! Blown up my meter! Can anyone repair it?

    Did a daft thing last week, i connected my Di-log 9083p multifunction meter to a live circuit and turned the knob to continuity instead of earth loop- sure enough the screen said "FUSE" and i had blown the internal fuse. Trouble is- i get paid per test and this was early in the day, so i bridged...
  18. G

    Underfloor Heating Repair or repair kit?

    Hi Folks, I've had a quick search for a thread on this but there are so many queries on UFH. I've been asked to repair some UFH where a carpenter has sliced through it with his stanley knife. I've never worked with UFH before but what i have been told is that this stuff is called elements e...
  19. K

    Curry’s repair service ! ? ! ? ! ?

    Got a call a couple of weeks ago from a disabled friend, he’d bought a new cooker which I’d connected in for him. Anyway gets the phone call “all the rings have stopped working” so I popped around to see him. Took a quick look at the back of the cooked and every panel had the “warranty invalid...
  20. S

    Light Repair

    Went to a job today where the customer had a rose & pendant not working, they said that a other electrician had had a go and had left saying there was no power going from the switch to the R&P so a lot of holes would have to be made in the ceiling and wall and a new cable put in. I removed the...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top