Was originally asked by client to put a 6kw supply in for steam room on first floor which we have done
client then brings out equipment and asked us to wire it in, Turns out it's for a 3 phase supply as the client is Dutch it's from Holland an no instructions in English
After speaking to...
Hi,
I visited a property today and after initial checks and before i go ahead with the quote i noticed that the shower (power shower) is supplied from the living room Ring.
I've informed the customer that this is not to regulations and requires its own supply. At the moment the customer...
Hi Folks
First posting. My background is in joinery with any little knowledge on electricity picked up as I went along which isn't enough to answer my query.
The lad lives in a flat in a large block about 150 years old. In the flat is a room about 6 feet x 5 feet containing a wc and wash...
Doing an EICR in a property and on arrival found that the fuseboard and supply,cutout and main fuse are all in a converted shower room which used to be a large cupboard.
The board is enclosed in a small wooden boxed in effort.It is 1.4m from the edge of the shower tray so technicallty outside...
Hello everyone! Just a quick question, i am decorating my 2 bed flat, i just wanted to ask, how many bt sockets normally installed in 2 bedroom flat? Is there a limit for that? Or i can have as many as i want?
Got a customer who wants multi room music installing in his house that is being extended
I have never installed anything like that but I am interested in branching out.
He is wanting ceiling speakers and the ability to control different areas.
I did suggest going down the sonos route but just...
Afer Bedroom Extension increase the number of sockets in a room
do they need a Building Regulations Compliance Certificate that confirms check part p electrical safety dwellings or minor electrical works certificate? please advice thanks
(The circuit have RCD protection).
Regards
universal
Our extension is now being built and we have a room which is for the kids/TV so I want to make sure its done right..... so my plan is:
TV on wall with socket behind, trunking inside wall to "devices" below.
3 x 2G sockets
2 x TV points (we have a splitter/amp which can cope with satellite...
Hi,
I have a worcester oil boiler (danesmoor utility), it is run by a drayton lp522 timer and I have a room thermostat.
The internal thermostat is set to the 3 (there are 5 positions).
My question is; The boiler is firing and the radiators are getting pretty hot, but I have noticed on the...
I'm trying to for a PIR with a light but unsure how to connect. I have good knowledge and can install plugs etc have installed lights before. The pir has a NAL connection. What goes into A? And how would I install a light? Based in UK.
For a new block of flats I am considering locating the meters in a meter room. Our suppliers now fit 100A cutouts after each meter. From each meter cupboard I want to run 25mm SWA (or the braided 25mm cable, watever this is called) to the consumer unit inside each flat. Now the cable entering...
I am having my old boiler (hearing only not dhw) replaced with a supposedly more efficient modern one. The engineer insists that, according to regs, he cannot turn it on unless there is a room 'stat. Since each radiator has its own 'stat this seems superfluous. He has suggested that I mount...
Hi first post diy, I have a Y plan system ,the system is quite old and fully pumped with header tank in loft. I want to connect a Honywell DT92E wireless room stat .
The Honywell receiver BDR91 Has the Terminals NLL ABC the information I would like, is do I make up a little link wire for...
Hi I need to clarify some details I found on a EICR in Kingston. The house has a large indoor pool with a separate plant room for all the machinery.
The pool itself is upto present standards (12 years old) with a separate pit with all the jacuzzi pumps and lights which are inaccessible without...
The light in our utility room is currently spurred off a double socket in 2.5mm T & E into a fused connection unit then upto the light in 1.5mm T & E. The FCU also doubles up as the switch.
Because we are having the kitchen done I now have the opportunity to get the light back onto the...
Hi Guys,
I'm new to the forum here, and the following question is probably going to seem trivial to you, but hopefully you'll be able to help me.
I use a 3kW Heating Element for a unique application. Basically, I use it to heat up a tank of 10L of water to 70C. Recently I made a second tank...
I was watching an electrician wire a room stat and was unsure how it worked and he wasn't to inclined to tell me how it works,
from what i can see he wired 2.5 from boiler spur then a 1.5 3core and earth to a room stat from boiler... is this correct?
I've just popped over from the other side, ( plumbers forum ), to ask if the above mentioned room stat is a type of intelligent stat, in other words can it be taught to know how long the system it's controlling takes to reach its preset temp, and to come on before it gets too low, ( hopefully...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc