I'll set the scene.
I'm not an electrician, I have no relevant qualifications but I do have experience with Solar PV (loosely) having had a system installed for some year and various other PV related items.
So I'm in the process of setting up my shed with some off grid power, for no reason...
I have recently had my garden fully wired (radial system ... unsure that means) in each corner by a profession electrician. I have been informed that I can run electric heaters, kettle, etc. with no issue and it runs from the consumer unit in my garage which I think is connected to a 65 amp RCD...
Hi, I’ve been asked to install lighting and 3 sockets (one of which is for a fridge) in a wooden shed. Due to location of consumer unit the only feesable option is to use the feed from the Jacuzzi which is on the non RCD side of the CU using a 40A MCB with 10mm Twin & Earth cable and own...
A dedicated 20A type C MCB located in the consumer unit in my house feeds power to my detached brick-built double garage via an underground armoured cable. This MCB is one of a group that is controlled by an 80A RCD.
There is no additional MCB protection within the garage. The incoming...
Hi,
I have been asked advice on installing a smoke detector inside a small wooden shed at the bottom of a garden, which is currently used for spray tanning. I have said that a smoke detector will be of no use as the mist from the machine will constantly sound the alarm. I thought I could fit an...
Hello,
I'm fairly novice at electrics, but know the basics and realise what will happen and how to prevent blowing myself up.
I'm hoping to run power to my shed at the bottom of the garden which will require around 35 - 40 meters of cable. We bought our house 2 years ago and there evidently...
Hi All,
Having recently qualified as an electrician, I am beginning to understand the adhocs and curveballs that customers can throw at you.
Last week I went to quote for a shed installation. The shed is approximately 25m from the property and would be a relatively straight forward notifiable...
This is possibly quite simple. I am not an electrician but am good at digging holes, I need electric running to my shed so I can put a freezer in it, how deep should the trench be (I am guessing 2 spits depth) so I can cut the most labour intensive part of the job as much as possible...
Hello guys
can anyone suggest a wired alarm kit that will go into a shed, ideally the unit can send a txt message to a phone.
A wired stand alon PIR unit will be nice but all i can find are cheap battery ones which are a bit useless
Hi,
I have been asked to finish a job in a shed installed 2 years ago. Just reading up on the regs, as it is heating there is an element of a higher fire risk....
What the deal if its in a wooden shed?
Looking to get electrics in my shed best solution I can think of is.... 6mm from the main board in my house out to a waterproof junction box, connected up to swa which then goes off to the shed and connects to a sub board. That then controls the power there on wards.. any suggestion on better...
Hi. I would like to supply power and lighting to my new garden shed from my bungalow which is approximately 4 mtrs, away. I intend to have a small fluorescent light and two double 13amp sockets. The shed will also house an under counter freezer and a tumble dryer.
I have discovered an old...
Hi guys
A friend of mine has an electrician at his place doing some work and hes asked him to put in a supply for his shed. Its a 19metre run would be from one end of the house through the joists under the floorboard and then out into the shed outside. The electrician has ran it with 10mm T...
I'm planning the electrics for my shed/summer house which is in a field miles away from mains electric. I want to run some 12v led filament lamps along with some 12v Gu10's. Total of around 50W (4A) Also some usb outlets for phone charging etc, and maybe a caravan style water pump for...
Some professional advice greatly appreciated here for design and costing purposes - two simple questions.
Background: We've just replaced a 25 year old wooden shed - good service but sagging a little from age and too small for our needs - with a larger one from Beast Sheds Ltd. (Recommended!)...
Good evening
I am an electrician from abroad, I have my 17th edition pased in UK and I am working as an electrician in industry since 2012.
I would like to power my shed with a 2.5mm Armoured cable. Can enyone tell me if I can do it as described in digram below.
Do I need the socket outlet...
Hi all,
Went to a house on friday due to sub-main to shed not energising. This was simply due to the MCB playing up. I flicked it on and off a few times and it works fine now.
However im not happy with the way the submain has been installed poorly.
The sub-main is in the form of a 3 core SWA...
Hello,
I have following scenario, 20A circuit breaker in the CU. 3 x 2.5 SWA cable feed to a garden shed CU. In the shed CU I have 0.69 ohm on the income cable. On the shed are two 16A radial circuits of socket outlet. When I do Ze on the sockets , I get 2.9 ohms.
The radial circuits have...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc