Hi,
Just need to check something. Sparky installed two new plug sockets. To do this, cut into the main ring, put a junction box in, one cable out to socket. Then from there connected one more plug. I understand to spur off a spur you should use a fuse between them?
Hi
I’ve got an aluminium flexible duct from a cooker hood extractor which runs right next to a Switched Fuse Spur (3amp fuse)
Do you think I need to protect it from the heat generated in the duct?
Thanks
Hi, I have a question about a kitchen spur.
Currently fitting a kitchen for my brother, he is having a built in microwave in a wall unit and I took a spur from a double socket off the ring and ran it to a single socket in the wall behind the cupboard above the microwave.
Now he tells me he also...
Hi all,
I have recently had a new hood installed and need to install some ducting. I live in a flat with loft access its a 1 up 1 down.
I'd like to run the ducting straight up into the loft and then out through the soffit. Can someone please recommend makes of vents, ducting to use? And also...
Hi all,
I've a double socket in the loft running off a spur from a bedroom socket.
I'd love to add lighting into the loft, and wondering if I can run a socket radial and lights off the spur using a junction box and 2 fused connection units?
Please see the attached diagram for a description of...
Good Evening All,
I have been asked by the family of some elderly neighbours to install a socket in an understairs cupboard for a small chest freezer and add a lighting point in the same cupboard.
Installation is protected by a Wylex 3036 rewireable board so had no rcd protection and the...
external socket on the outside of the house, power needed in the shed, isit ok to spur of this to go 10meters into the shed underground using swa? If so, what's the best way?
Hi all,
I have a single surface mounted socket in a cupboard which our freezer is plugged into. We don't have any sockets in our hall which the cupboard is off so I thought it might be useful to change the one gang socket for a two gang, again surface mounted to keep it simple.
Its on our...
Ok guys been asked help mate out but i think he has done his install wrong but as misplace my regs book cant find exact regulations he contravines.
Scenario is this big boiler room and pre existing metal clad sockets in ring final circuit. 32 Amp protection.
He has added 6 FCU metal clad...
Looking to wire an electrical fire (2Kw convector heater) which is fitted with LEDs (separate supply) can I use a single spur or would I have to have 2 separate spurs?
Thanks in advance
Hi all,
I have a spur socket on the upstairs landing from a ring socket in an adjacent bedroom.
It is connected in 2.5mm T&E ; is this okay or should it be 4mm due to it being a double outlet hence it could supply 26A?
It currently has only a decorative LED tree thing plugged in.
The cable...
Hi all,
(Just reposting, there was some confusion, I was mistaken for a domestic electrician, I'd like to think I have basic understanding, but I'll stick to carpentry!)
There were some great replied on the original thread, but I thought id post again, with the info I posted, you never know...
Hi all,
Would somebody draw a diagram of how they believe a Fused Digital Timer Spur switch should be installed.
A bit of information;
There are 6 floor standing outdoor LEDs.
1.5mm SWA feeding each and routed back to the consumer unit. Shall be protected by a 6amp Wylex RCBO.
Thanks in...
Just recently has some work done on a conservatory, and in the process discovered that the 2 double sockets are not part of a ring main... looks like one is a spur off the back of a ring socket in the main house, and the second is a spur off of that :eek:
So, question is, if I replace the ring...
Hi guys
Wanting to put an 8 watt led light fitting outside ,
Only place I can get a supply from is kitchen ring main got a radial approx 4th long.
now issue is the radial is already feeding combination boiler and a single socket for washing machine. If I put additional spur in for outside...
Hi, I'm looking to replace my electric single fan oven. It is plugged into a double socket, the other socket having the gas hob plugged into it, and this double socket is wired to a 13a switched fused spur. Looking at the ovens in my price range I can see some that include a plug and can be...
Hi,
Hoping to get a 2nd opinion please. We are fitting out a new room and will be wall mounting the TV. We want all connections to be hidden behind the TV. The problem is that a standard mains socket and plug is too deep behind the TV so TV sticks out too far.
Currently, in another room...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc