Hi,
I'm getting conflicting stories about this, I wonder if someone could put this to bed once and for all.
I'm replacing a consumer unit in the next few days, and it currently has the common grey tails going from the isolator to the existing consumer unit, one is ,marked "L" then other marked...
He says 'it's fairly important to change the consumer unit as it wont pass the Inspection in its current state.'
He's coming round tomorrow to replace it, has he given me duff advice?
Cheers,
Matt
Hi. I have a small new build sit to price up. The consumer units are to be sited in the middle of the house behind the front door. After best way to supply from external meter box. I was thinking of using split concentric from kmf with a metal plate over it on internal walls. surface mounting or...
Hi, For anyone struggling with science part for 202 and 302 unit I found videos on youtube
https://www.youtube.com/c/JoeRobinsonTraining/playlists
Hope it helps.
Long time lurker so this may be my first question. I am a qualified electrical engineer, but in aeronautics not domestic installations, and I may therefore ask silly questions. We have purchased a property that is unfinished, and where the electrician went bust before the installation was...
When carrying out an EICR I found this board. The live bus bar cuts across the neutral where the tails have exposed copper. Is this the way these boards come? I have never came across this before
Cheers
Hi Folks
I've been asked to quote for a consumer unit, supply cable and some internal wiring in a shipping container on a private caravan plot (single family residential). The container will be used as a shower block. The mains supply will come from a meterbox installed on a post on the plot...
This is getting embarrassing - I've been looking for a sub-main consumer unit in a church for an hour now.
I've found the incomer. There's a nice old Crabtree board with black breakers, one of which is a 50A for "Hall DB". It's a split level site and the hall is downstairs, and the fat 10mm T+E...
The photo shows a cooker hob ignition switch unit from a Neff/Bosch hob. One of the switches has failed. The issue was caused I think by ingress of liquid. I have dried the unit as well as I can. A replacement unit costs over £40. Has anyone ever opened one of these to repair it? I am reluctant...
Good evening
Have to quote on a consumer unit replacement, problem is gas meter is next to existing consumer unit 25 mm between them, they are both in a wooden cupboard,
What would you do
When carrying out EIC on a new consumer unit installation and found a existing ring circuit with a Neutral to Earth fault causing the rcd to trip.
The old fuse box didn’t have rcd protection as it wasn’t required.
The problem is after removing all connected and appliances loads the fault is...
hi all, Hope everyone are well and keeping busy.
I am quoting for an ev charging point installation,
the only way I can supply it, is to split the tails in the meter cupboard, and install a weatherproof consumer unit External to the meter cupboard, as I know the dno do not permit you too...
Evening all, I’d appreciate your opinions here:
I’m looking at an old (150 years+) stone house. Complete rewire and renovation. DNO fuse is currently where the master bedroom will be (upstairs). Client wants it to be moved to a more accessible location downstairs about 15m away depending on the...
Hi,
Just after your thoughts on the following-
I am running a 25mm armoured from a KLM switch fuse to a consumer unit under the stairs in a domestic property. I intend to gland into a joint box and take 6181Y meter tails to the consumer unit. Under the 18th a edition the consumer unit needs to...
Hi I have seen a few of these they fit flush inside a electrical cupboard I’ve seen Wylex and Crabtree . I’m changing this db but can’t find the name for these style of boards
I've got a Kewtech proving unit for sale if anyone is interested. Cheaper than the going rate to anybody on the forum.
It's like new and has hardly been used. Will take £30 + postage of £3.50.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc