units

  1. R

    Domestic Mantel Cabinet Amm 3

    Sorry for the long post in advance.!! Looking for thoughts on this and some guidance. I'm on a contract renewing bathrooms and kitchens which includes fuseboard replacement. 80% of the properties have a metal mantel cabinet with old non RCD internal skeleton cu. We have been installing the wylex...
  2. S

    TT system consumer units

    Hi, I do a lot of work on domestic TT systems. Now that AMD 3 is in force, what are you guys using RCBO's or a 100ma S type main switch for TT earthing systems. Cheers
  3. W

    City and guilds 2360 part 1

    Hi do any of you remember how many units there were on the 2360 part 1 course in around 1995/6 and what each unit was called? Long shot I know but any help would be great thanks
  4. J

    Self Build Advice Please - consumer units, sockets & switches...

    Hi all, We are doing a self build 2 bed bungalow in Devon which is going to be very highly insulated with u-values of.. Floor 0.15 Walls 0.14 Ceiling 0.11 With an air tightness factor of 0.8 MVHR with 89% efficiency * Our other design spec includes no central heating system (not required...
  5. polo1

    BG Nexus, polished chrome fused connection units

    Re the above, anyone had recent experience of the above, not switching off (switched fused connection unit, obviously!). I've had three recently with the same fault. I emailed BG tech, who provided a prompt response advising no known bad batches/ problems, but willing to investigate if I or the...
  6. D

    BG consumer units

    I've got one in my home and was going to replace it for a new metal one Looking around found The BG consumer unit, I was looking at 95340: 20-Way Metal Consumer Unit & 100A Switch figured be a direct swap as they looked a like But turns out just the back is metal and the front is some...
  7. D

    consumer units

    Hi, i am having my consumer unit replaced in the house, and a new consumer unit in the garage for lights and sockets. I have had a couple of electricians come out and look at the job, but they both say conflicting things about how the job needs to be done, so i would like some advice about...
  8. D

    Consumer units tripping out

    Hi Everyone I have just joined this forum as I am having problems with my consumer unit tripping out. I dont have any formal electrical qualifications so please excuse my ignorance. It is a modern 8 fuse consumer unit where the circuit can be reset. Occasionally the whole consumer unit will...
  9. Soulsurfer

    Amendment 3 Consumer units

    Hey all, seems to be a load of manufacturers selling Amd 3 domestic cu's with 2 x RCD's splitting the board and then just mcb's. I have never bothered doing anything but multiple rcbo's due to the hassles of RCD going and taking other circuits due to a little bit of earth leakage from...
  10. Simonslimline

    Connections in consumer units.

    When say adding a new circuit to a DB/CU do you tend to check all the connections in said DB/CU are sound and tight! I have come across a few boards recently where pretty much every cable is loose including the main tails literally just sitting in the switch, but no signs of overheating etc, so...
  11. T

    3rd Amendment Metal Consumer Units - best practice advice please

    Afternoon all, I've been doing domestic electrics for about 4yrs now and although I've done a few circuit alterations on metal clad consumer units I'd say that 95% of my work has been with plastic ones. I'm totally comfortable with replacing a consumer unit and all that it entails, but I've...
  12. S

    Storage Heaters and Consumer units with Split RCD.s

    Hi So I've a project coming up where I need to Move a Fuseboard which is Split On peak with One rcd for The Flat ring and off peak Storage heaters . no rcd . Its Dated 2001 so the fuseboard will need to be replaced With a split board with 2 rcd's for on peak Power and lights etc . I've a few...
  13. E

    Amendment 3 Consumer Units

    Scenario:- DNO TT Supply from pole to a outdoor meter kiosk(fibre glass) to supply car park lighting on privately owned Business Park. What CU would you guys fit, bearing in mind the new regulation coming into force 1st January 2016. Also what material backing board for mounting the CU & DNO's...
  14. 5

    new consumer units.

    has anyone started fitting new metal clad consumer units yet. if so what are you using to form the glands where the cables enter the boxes. They seem to be selling the boxes down here but there is not much else with them yet. or are you still fitting insulated ones until jan 2016?
  15. E

    Multiple consumer units

    Hi guys, im currently in the middle of doing a rewire on a large domestic property which has a single phase supply, in total I will have 4 consumer units and a distribution board of some kind - also we do lighting control so all the light circuits are separated and going back to a Cbus lighting...
  16. A

    Square D Quikline RCBOs

    I'm after a 6amp and 32amp rcbo that will fit in a Square D Quikline consumer unit. Does anyone know what replacement breakers fit these boards. I know Schneider took over square d but the acti9 range is Merlin Gerin rebranded.
  17. E

    Bridging 303/305 units

    Hi, I've completed one year ago C&G 2365 level 2&3. Starting now combined 2394/2395. But still I am stuck with the NVQ 2357 and XStraining. I've completed all the units 3 months ago, except 303/305. Does anyone know where and how can I get the gola exams just for both units? Awaiting 2 months...
  18. M

    Power factor correction units

    Hi guys, I've just completed a job in moving 14 plastic / rubber injection moulding machines from their old factory up to their new unit, most have been supplied with 100A / 125A fuses from the busbar down to a local ISO and into the machine just to give an idea of the size of the install. Half...
  19. Andy78

    BG consumer units

    So I generally don't fit these. I tried one a few years back, thought it was generally quite shoddy. My mate also tried a couple and reported 2 cases of RCDs not meeting trip times straight out of the box. Any cost saving instantly negated in lost time, back to a decent brand. Last week I...
  20. G

    metal consumer units and DC combiner boxes etc

    Does anyone know what the crack is with this nonsense about needing to move to metal consumer units under the yellow wiring regs update, and how this will apply to the DC side of solar installations, where we actually need the units to be fully insulated as earthing the box makes bugger all...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Advert

Back
Top