wired | Page 5

wired

  1. J

    Another coding question

    What code would you suggest for uncovering a power circuit wired in copper cable less than the csa stated in table 52.3 provided the ccc of that cable wasnt effected. Thanks Judd.
  2. P

    Does a 13A plug in oven need to be wired into a cooker switch in rental properties ?

    Hi, a landlord got in touch this weekend as they wanted to change an old gas oven for an electric one in their rental property. It would be a small single oven, under 1.5 kwh, and comes supplied and fitted with a plug from the manufacturer. The plan was simply to plug this into an available...
  3. T

    smoke alarm wiring.

    went to change three smoke alarms today and found they were wired in 1.5 t&e useing the cpc as the interconect link wire. would you class this as a c1 / c2 i was thinking c1, any thoughts
  4. C

    advice - two wall nights and one dimmer switch wired wrong!

    Long story short i had a friend helping me out with some DIY today and I have realised that he left the wiring like pictured. I have and voltage tester so i have worked out that the middle red wire is the live one. Long story short they are now not working (i have tried some variations based...
  5. Z

    Steel conduit used as CPC in flat, can’t find bonding, can’t find ring main CPC at C.U

    I’ve been asked to add a couple of extra points to the single ring main in a flat. Building fabric is concrete, all of the electrical installation is steel conduit buried in the concrete. I opened the consumer unit and could only see one CPC for a radial socket, as well as the main Earth. No...
  6. M

    LED striplights wired to ring main

    Hello all, I'm new here, first post and no elec qualifications, so a few condescending replies I'm sure are more than deserved. I'm currently looking to add some strip lighting to the back of some shelves in the bathroom (wife thinks it looks fancy). What I really want to do is avoid a second...
  7. Jonmat

    Wireless lighting without wired switches

    Hello, I bought my house last year and had a look in the consumer unit before I bought it and it had a dual RCD board and all PVC cable inside including a periodic inspection report that said it was compliant. However when I came to remove some pendants to replace fittings I realised all the...
  8. T

    New circuits wired into a plastic consumer unit

    Had to install a ring main & cooker circuit for a new kitchen we have been doing. The consumer unit is hager split load but is plastic. There is no room in the cupboard to add another board and the customers dont want to pay for a board change. I guess i could just note on the form saying...
  9. Nelder

    Hard Wired Smart Intruder Alarms

    Hello. Can anyone recommend and fully wired, online / smart intruder alarm system please. Preferably one that can be expanded to include CCTV with DVR. The below would be ideal except for its wireless. Yale Smart home Alarm & 1080p Wired CCTV Kit Bundle | DIY at B&Q -...
  10. C

    2.5mm Ring wired off a 4mm Radial

    Hi, I have been testing a domestic property today and when i started to look into the kitchen sockets there is a 4mm radial from the DB going to one socket on one side, the 4mm radial is cut into and JB'd and 2x2.5mm cables run out forming a ring for the other 4 sockets... Does this obey regs...
  11. B

    Mains wired smoke / heat / CO detector question

    Hi Guys We're having work done to insert an open plan kitchen-diner and snug seating area plus wood burner into already existing extension. One load bearing wall is being knocked through. Electrician just bumped his quote up by £820 to cover replacing this consumer unit and moving it up the...
  12. H

    Wired socket. Earth tripping rcd?

    Hi.. If I could get a little advice, that'd be great. Thanks in advance. Yesterday I replaced the surface mounted twin socket in my living room with a flush mounted one. This is the third I have done in my house, the rest of the sockets are already flush and these three looked very ugly! It...
  13. S

    Neff hob with a plug - can it be hard wired?

    Hello, I had a rewire in my kitchen extension weeks ago and the electrician left a spurred hard wire for the hob in the right place before my kitchen was fitted. The kitchen is now fitted, apart from a some appliances, and it seems my Neff induction hob has a plug socket... I just assumed it...
  14. D

    Emergency light won't switch off - correctly wired new lights.

    Hi, here's a good one - replaced 15 E-lights recently, (tube type replaced with Newlec led type), and noticed one of the old outside Thorn 2D E-lights was on when driving past a few days later. The Thorn lights are all up to spec and function as they should. Went to investigate and it seems that...
  15. C

    Advice on the way my house has been wired

    hi, after any advice or ideas if possible. we have just moved into a bungalow built in 1964 and apparently it was rewired a few years back. it has lots of trunking from the ceiling to the sockets and we are looking to chase them into the walls. We have removed a double socket from the wall and...
  16. jimmy gunstone

    please help! wired a 2.5kw ac into a oven circuit and breaker. is this ok?

    I just installed a new hitachi 2.5 kw ac and wired it into an old cooker switch which goes to a breaker of 32amps. the unit Hitachi Summit RAK-25PEB 2.5kW Inverter Split Wall Mounted Air Conditioning System Aircon247.com | discount portable air conditioning, fixed air conditioning, easy install...
  17. P

    Smokes wired to a JB?

    Have a bit of an awkward run at a job and was debating whether it was easier to wire all the interlinked smokes to a Wago box or JB. They are Aiko smoke alarms and wanted to know whether anyone has done this before and would it make any difference?
  18. A

    Adding a wired bell (with transformer) to a 2 way intercom

    Hello folks, I'm just your standard 'diy'er! I don't seem to be able to achieve the above, can anybody give me some pointers? We have an existing 2 way intercom which goes to only one part of the house. we want to add a wired doorbell (Byron 766 inc transformer) so the rest of the house gets a...
  19. C

    Push buttons wired in parallel replace

    hello guys Block of flats, communal areas currently have a time lag push button system in place. They want the buttons replaced with PIRs however there is no neutral at the switches? Are the neutral free push buttons not very good? What are the options.
  20. A

    Car dash camera wired into dome light

    Is there any reason why a car "dashcam" could not be wired into the dome light? This would be a much better method than the usual. The next question is not an electrical one, but people reading this are probably into cars (!) so I include it anyway: Alternatively (or additionally, for a rear...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top