Does anybody know where I can source an old style Wylex PSB 63A SP MCB? It's to fit an existing 3 Phase Distribution Board with fork style busbar.
Thanks in advance.
Hi all, hoping to get a couple of grounded (sorry) opinions.
Removed a carrier from my old Wylex box. Under the carrier there’s a flash-guard and that’s screwed to a plastic ridge which divides the two contacts. God knows why or how but the plastic ridge sheared off so although you can wedge...
Hello everyone
In my garage, I have an old Wylex Fusebox (see attached) containing a 5 and 15amp fuse. Both of them have now blown which means that they need replacing. From reading around the internet, I understand that I can purchase some Wylex MCB's. I've looked on Screwfix and there's a...
I have been doing some work for a hedgehog charity so funds have been tight.
I have remedied a number of non conformity items as they want an EICR for the landlord.
I am happy with the general condition of the circuits and readings are all within range. A number of C3s have been given, with one...
hanks
Hi new member here wishing some advise!
I've a 6 Way Consumer Unit with Wylex Type B (WYB Series, BS3871) Push In/Pop Out style MCB's, which is working with no known faults.
Utilising 2 x 5A MCB's re front & rear ceiling light circuits, and 2 x 30A MCB's re front & rear power socket...
Can't shut off this switch fuse to see what type of fuse is in it. Needed for EIC.
It says 100A but not the type, I'm guessing its a BS88 but would like to know if this is all they take or if they vary, in which case it'll have to be a scheduled shut down.
Internet doesn't really give any...
recently brought a new Wylex RCBOb NHXSS1B16
It has not come with a earth tail like all the older NHXSBS1B16 but had the neutral tail.
Do I just connect the earth from the cable I’m feeding into the earth bar ?
Just curious tbh ....
Got an issue at home, today I got home and found one of the RCD's had tripped on my split load Wylex DB.
I tried to reset but it wasn't having it. Switched all MCB's off on the RCD (Call it number 1) that had tripped then reset. All was ok, switched each MCB on and stayed in.
Put the kettle on...
Saw this on youtube part of the GSH channel. Probably the best video to demonstrate an AFDD in use I have seen as of yet, It is a Wylex one and no doubt pricey, i could see the time in a few years where the AFDD and rcbo will all be incorporated into 2 modules and each circuit protected by one...
Good evening people,
Next question from a non-sparky. My electrician has asked me to get a 60 amp MCB for a board, he said I would find one on ebay as the board is a few years older. The other MCBs are Wylex Type 2. I can't find a 60 amp Type 2 but I have seen Type 1, can some one tell me what...
Just carried out a pre-work survey (older property and I wanted to check it over) for a client that wants a few extra sockets and other bits and bobs. The installation has a 5-way Wylex board (I’m guessing 1980s - white/cream plastic) which has had RCD protection added externally at some point -...
A customer wants a house refurbished. Attached is a photo of the existing Consumer Unit. three circuits are protected by an RCCB (an old type of RCD) and two aren't. I have recommended a new Consumer Unit with full RCD protection. Is there any way the existing can be made to conform?
Apologies for newbie question- I'm only an occasional sparky and get stumped by these things from time to time- What's the best way to get hold of these old Wylex fuses? I presume they're not made any more like this? Hope this picture comes over OK....
Had this in an email from Wylex, might be useful to people as it summarises some of the changes in the 18th edition quite well. things might change but from what I have heard industry and a lot of the various bodies pretty much know whats staying and going from the draft but cant officially say.
See wylex boards do they need to be changed and need de clear advise the customers always re luctant an my advice and answers seems unconvincing. What reasons wwhy and de advice
Hi attached picture shows a 1975 wylex consumer board in a flat we are in process of buying. Doing a bit of research whilst waiting for the paperwork to get sorted.
Found plenty of information on how to add a new skeleton board in and quite a few pictures of same old board. but none so far with...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc