D
Dantheman
what would happen if you connected 6mm twin and earth tho a 2.5mm twin and earth via jb ??
Many thanks
Many thanks
Discuss 6mm t & e connected to 2.5 t & e in the Australia area at ElectriciansForums.net
i would extend the 6mm in 6mm to a FCU. then fuse the FCU accordingly to the load.
Reply to 6mm t & e connected to 2.5 t & e in the Australia area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 800
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 828
Similar threads
Came across 3No 1ph heaters connected by 2xT&E cables from a 3phase supply on an installation whilst carrying out an EICR few years back...
- kev.k
- UK Electrical Forum
- 9
- 749
In the 80's I was taught that with PME earthing arrangements we used 16mm for the main earthing conductor, some went a bit crazy and were bonding...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Electrical symbolon a motorbike, Mike? It seems to indicate that these two wires are to be considored as a...- Latest: littlespark
-
-
Thermostat ProblemMany thanks for your reply. My original question on the other board was: Hi, First post and...
- Latest: Chewy56
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.